Epoxy Resin System for Stone Carpets (Resin + Hardener)

Epoxy Resin System for Stone Carpets (Resin + Hardener)

4.8181818181818 out of 5 based on 11 customer ratings
(11 customer reviews)
Delivery time: 1-3 working days

With our ECO epoxy resin system, you can lay your desired stone carpet in just a few steps. To do this, mix the epoxy resin with quartz stones and spread the material evenly on the desired surface. Detailed application instructions can be found on this product page.

  • Epoxy resin system
    Ideally suited. X Not suited. ~ Not ideal, but can be used.
    ECO System
    Mixing ratio by weight Resin (A): Hardener (B) 100:50
    Applications
    Coating
    Sealing
    Pouring
    Repairing
    Application areas (e.g.)
    Priming, coating and sealing of floors (industrial floors, garages, interior floors, bath etc.)
    Coating and sealing of tables, countertops and other furnitures/objects
    Bonding and sealing of concrete, wood, plastic, hard foam, natural stone, fiberglass and other materials
    Processing caracteristics
    Sandable
    Polishable
    Max. Pouring height per process at 20°1 1cm
    Waiting time until further casting at 20°2 (Number of pourings: unlimited) min. 6h
    Gelling time and pot life (Gel Timer TECAM) 25min. (100g)
    Min. Processing temperature 15°C
    Max. processing temperature at max. casting height 20°C (1cm)
    Max. processing temperature at 1mm coating height 35°C
    Max. relative humidity during processing 70%
    Max. Material shrinkage after processing 1%
    Processing time (at 20°C)
    At layer height 0-3mm 60min.
    At layer height 1cm 25min.
    At layer height 2cm X
    Touchable / Accessible on foot / Demoldable (at 20°C)
    At layer height 0-3mm after 20h
    At layer height 1cm after 20h
    At layer height 2cm X
    Completely chemical curing after 7 days
    Technical properties
    Transparent resin
    Crystal clear curing X
    Max. possible UV protection3 X
    Self-venting
    Bubble free
    Self-leveling
    Solvent-free
    VOC free4 X
    BPA free5
    Plasticizer free (Phthalate)
    Resistant to chemicals
    Scratch resistant6
    Doming effect (depth effect)
    Miscible with all EPODEX colors (except WB PIGMENT)
    Suitable for underfloor heating
    Suitable for outdoor use X
    High adhesion
    Density (g/cm3) 1,1
    Viscosity (mPa·s) 700
    Max. heat deflection temperature7 60°C
    Min. heat deflection temperature -30°C
    SHORE hardness after curing (D1) 87
    Storage temperature 10-30°C
    Shelf life 12 months
    Shelf life after opening8 6 months
    1. Coating above the maximum pouring height per process is not recommended. The resin may boil as a result of the reaction and yellowing, cracking and deformation can occur.
    2. There is no maximum time limit to pour the next layer.
    3. No epoxy resin is completely UV resistant. However, high-quality raw materials and additives such as UV absorbers can increase UV protection. By using a topcoat, you can increase UV resistance even further. Possible topcoats are e.g. transparent polyurethane (PU) resins or lacquers which are painted or sprayed onto the epoxy coating as a finish.
    4. When properly used and completely cured, it is VOC free.
    5. According to formula without free BPA.
    6. Our epoxy resin systems have a high scratch resistance, but are not completely scratch-resistant. Scratch resistance can be increased by using a topcoat. Possible topcoats are e.g. transparent polyurethane (PU) resins or lacquers which are painted or sprayed onto the epoxy coating as a finish.
    7. The heat deflection temperature indicates up to which temperature the cured epoxy resin system remains mechanically stable. At higher temperatures, the cured epoxy can soften. By annealing (curing at higher temperatures >60°C), the heat resistance can be increased.
    8. If the lid of the container is closed directly after opening, the shelf life after opening is at least 6 months.

Calculate quantity
Length (cm)
Width (cm)
Height (cm)
Required amount in KG KG
Required amount in g g
Equipment

EPODEX Epoxy Resin System for Stone Carpets (Resin + Hardener)

The ECO epoxy resin system is ideal for creating a stone carpet. Coat your floors, stairs, and other surfaces.


Instructions for use

  1. The scope of delivery includes resin (A) and hardener (B). Mix the contents of the resin (A) with the contents of the hardener (B) in a mixing ratio of 2:1 (e.g., 2kg resin: 1kg hardener).
  2. Pass the stir stick through the rim and bottom of the mixing container, as the material will settle there. Ideally, transfer the mixture to a clean container and mix again. This will ensure that the resin (A) and hardener (B) are completely mixed together.
  3. Then mix the resin-hardener mixture with your quartz stones. Add 4% of the resin-hardener mixture by weight to the quantity of quartz stones (e.g., 1kg of the resin-hardener to 25kg of quartz stones).
  4. Then spread the material on the desired surface.
  5. The material is touchable/walkable after 20 hours and fully chemically cured after about 7 days.
  6. For more information on our ECO system, please refer to the information table under the “Learn more” info button on this product page.

Info: Epoxy resin is sensitive to any kind of moisture during curing (risk of carbamate formation, i.e. white patches in the top layer). For this reason, we recommend that you avoid any contact between water and the epoxy until it has cured completely (at least 7 days). For thin layers, cold temperatures (ambient, substrate, and resin temperatures below 20°C) and increased humidity, the time until the epoxy resin is fully cured may be extended.


Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.

Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.


Ingredients, Security & Danger statements

A-Components (ECO) Warning: 2,2′-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane Reaction mass of 2,2’-[methylenebis(4,1-phenyleneoxymethylene)]dioxirane and [2-({2-[4-(oxiran-2-ylmethoxy)benzyl]phenoxy}methyl)oxirane and [2,2’-[methylenebis(2,1-phenyleneoxymethylene)]dioxirane Oxirane, mono((C12-14-alkyloxy)methyl)derivs Causes skin irritation Causes serious eye irritation May cause an allergic skin reaction Toxic to aquatic life with long lasting effects Avoid breathing dust/fume/gas/mist/vapours/spray. Avoid release to the environment. Wear protective gloves/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation or rash occurs: Get medical advice/attention. Dispose of contents/container to in accordance with local/regional/international regulations. Contains epoxy constituents. May produce an allergic reaction.

B-Components (ECO) Danger: Reaction products of 3-aminomethyl-3,5,5-trimethylcyclohexylamine and 4,4’-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane m-phenylenebis(methylamine) Salicylic acid Causes severe skin burns and eye damage. May cause an allergic skin reaction Harmful to aquatic life with long lasting effects Do not breathe dust/fume/gas/mist/vapours/spray. Wear protective gloves/eye protection/face protection. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Specific treatment (see on this label). Take off contaminated clothing and wash it before reuse. Store locked up. Dispose of contents/container to in accordance with local/regional/international regulations.

Customer reviews

Rated 4.8181818181818 out of 5 stars
11 reviews
4 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

11 reviews for Epoxy Resin System for Stone Carpets (Resin + Hardener)

Add a review

Use one of the allowed file type: jpg,png,mp4.