Keményítő (gyanta nélkül)

The hardener B-komponent must be mixed with the resin A-komponent before use. The Epoxy Systems, consisting of resin and hardener, are suitable for a wide range of applications such as civil, electrical and mechanical engineering. It is a classic coating, laminating and repairing epoxy resin. It can be used as casting resin in layers up to 10cm thick. Coat your floors, table tops and other objects. Our EPODEX Epoxy System are miscible with all our colour pigments.

1. Uvijek započnite s pripremnim premazom za epoxy smolu, kako biste izbjegli visoki gubitak materijala i mjehuriće (debljina sloja: 0,2-0.5mm). Za to jednostavno koristite dio iste prozirne epoksidne smole (za premazivanje podova i drugih obojenih podloga, preporučujemo uporabu našeg EPOXY PRIMER sustava za epoxy smolu na bazi vode).
2. Mix te resin A-komponent with the hardener B-komponent in a ratio of 2:1 (e.g. 2kg resin: 1kg hardener).
3. Promiješajte rub i dno mjerne čaše, jer se materijal tamo naslanja. Idealno, ulijte u čistu mjernu čašu i ponovno promiješajte dok smjesa ne postane bez linija. This ensures that the resin A-komponent and hardener B-komponent are completely mixed together.
4. Pour the the resin-hardener mixture onto the surface to be coated immediately after mixing, as the product can start to boil in the mixing cup.
5. Paint the epoxy primer with a paint roller or brush on the desired surface.
6. Let the primer cure. The curing time depends on the temperature and the layer thickness. You can find more detailed information in our information table ander the “Learn more” button on this product page.
7. Nastavite s glavnim premazom na isti način. Ako odaberete boju na ovoj stranici proizvoda, dobit ćete boje ili bojne pigmente uz smolu i učvršćivač.
8. To colour the main coating, mix the supplied colour with the resin A-komponent or with the resin-hardener mixture. Adjust the colour intensity individually by adding more or less colour pigment.

Informace: Epoxy smola osjetljiva je na bilo kakvu vrstu vlage tijekom stvrdnjavanja (rizik od stvaranja aminskog rumenila, tj. bijelih mrlja na gornjem sloju). Stoga, preporučujemo da izbjegavate svaki kontakt između vode i epoksida dok se potpuno ne stvrdne (najmanje 7 dana). Za tanke slojeve, hladne temperature (ambijentalne, podloge i temperature smole ispod 20°C) i povećanu vlažnost, vrijeme dok se epoksidna smola potpuno ne stvrdne može se produžiti.