TILE PAINT 2K Resin (without hardener)
TILE PAINT 2K Epoxy Resin from EPODEX is our silky gloss, abrasion resistant tile paint. The TILE PAINT 2K epoxy resin is ideal for painting heavily used floor, wall and ceiling tiles and is mixed with the TILE PAINT 2K hardener before application. The special paint is also used for tiles that are in constant contact with water (e.g., showers). Let your tiles shine in a new, modern colour. The scope of delivery includes TILE PAINT 2K resin without hardener. Consumption: 120-150g/m² per application. Application instructions can be found on this product page.
1. Selecionar cor
2. Selecionar quantidade
TILE PAINT 2K resin (without hardener)
The TILE PAINT 2K resin (A-component) is mixed with the TILE PAINT 2K hardener (B-component). Both components together form the TILE PAINT 2K epoxy resin system.It is designed for painting tiles on walls and floors that are subject to heavy wear and tear. This paint is very durable and easy to apply. It is odourless and free of solvents that are hazardous to health.
Volumes de consumo: 120-150g/m² par coating on smooth and non-absorbent surfaces.
Instruções de Utilização
- Sand the substrate to improve the paint adhesion. To do so, use EPODEX sandpaper.
- Make sure the substrate is clean and free of grease. To do so, use EPODEX PRE-CLEANER.
- Mix the resin A-component with the hardener B-component in a ratio of 5:1 (e.g., 5kg resin: 1kg hardener).
- Stir through the edge and bottom of the mixing cup as the material will settle there. Ideally, pour into a clean mixing cup and mix again until the mixture is streak-free. This ensures that the resin A-component and hardener B-component are completely mixed together.
- Mix the clear paint with our water-based colour paste WB PIGMENT to tint it. Recommended amount of paste to be added: Add 5% in weight to the paint. (e.g. 300g colour for 6kg TILE PAINT 2K)
- Apply a coat of paint with a brush or foam roller and let the it dry (aprox. 12h at 20°C). (Pot Life/Processing Time: at 20°C: aprox. 50 minutes, at 25°C: aprox. 35 minutes)
- Reapply as many coats as required to achieve the desired opacity. We recommend applying ca. 2 coats.
- As an option, tile joints can be re-done with our practical EPODEX grouting pen.
Recomendações: Processing temperature: The room and substrate temperatures must be between 8°C and 25°C. Do not apply on heated surfaces or in direct sunlight. Drying problems may occur at low temperatures. Clean tools with water immediately after use.
Valor limite da UE: (Cat. A/d): 140g/L (2010), máx. 140g/L COV
Serviço de Apoio ao Cliente: Se tiver mais perguntas, contacte-nos por telefone, e-mail ou utilize o nosso serviço de apoio WhatsApp.
Nota: Devido a diferentes condições de iluminação e monitores, as cores podem não ser apresentadas de forma uniforme.
Avaliações
Atenção Perigo
Perigo Provoca lesões oculares graves. Nocivo para os organismos aquáticos, com efeitos duradouros. Atenção! Podem formar-se gotículas inaláveis perigosas ao pulverizar. Não respirar a pulverização ou névoas. Contém compostos de epóxi. Pode provocar uma reacção alérgica. As informações no rótulo do produto devem sempre ser seguidas.
Produtos Relacionados
5.0
5.0