Poliuretán keményítő (gyanta nélkül)

The hardener B-komponent must be mixed with the resin A-komponent before use.

Coating and Sealing with PU Resin

1. Coat the surface with the PU resin.
2. To do this, mix the PU resin (A) with the appropriate PU hardener (B) in the specified mixing ratio. PU glossy: 10:2 by weight (e.g.: 1kg A + 0.2kg B); PU matt: 10:1 by weight (e.g.: 1kg A + 0.1kg B). Optionally, you can add up to 20% water.
3. Transfer the mixture to a paint tray and mix again. This way you make sure that resin (A) and hardener (B) mix completely.
4. If a transparent coating is not desired, mix the supplied WB colour paste with the resin-hardener mixture to colour the transparent mixture. We recommend a colour proportion of approx. 10%, e.g., 100g WB colour paste to 1.1kg or 1.2kg resin+hardener. We recommend mixing smaller quantities of approx.1kg per coat, as the material, is very productive and sets quickly (pot life: 60min. with 1kg).
5. Apply the material thinly with a foam roller in a criss-cross pattern. To achieve an even finish, use our scraper grid to scrape off excess material before application. We recommend a layer thickness of max.150µm.
6. The material can be walked on after approx. 20-24hours and is completely chemically cured after approx.7 days.

Pro Tip: We recommend adding water to the PU resin when working at high ambient temperatures or when mixing a large quantity in order to avoid an orange peel texture.

Zákaznická podpora: Pokud máte další dotazy, obraťte se na nás telefonicky, e-mailem nebo využijte naši podporu prostřednictvím WhatsApp.

Poznámka: Všimněte si, že kvůli různým světelným podmínkám a monitorům se barvy nemusí jednotně zobrazovat.