Decorative Concrete Plaster For Walls | Concrete Effect
Decorative levelling compound with concrete optic. Cost-effective alternative to microcement. Ideal for rented flats as it is easy to sand and paint over afterwards.
- Decorative levelling compound in fine to medium grain size for walls and tiled walls.
- Can be used on all surfaces such as concrete, metal, plastic, wood, etc.
- Can be applied to absorbent and non-absorbent substrates in layer thicknesses of 0-10cm
- Areas of application: Indoors. Outdoors and damp areas with PU sealant
- Mixing ratio: 5:2 (e.g. 1kg EFFECT powder with 400ml water)
- Working time: approx. 30 minutes (fast setting)
- Scope of delivery for 5m²: 5kg EFFECT powder + 2x 100g WB PIGMENT paste to dye the powder
- Drying Time at 20°C: approx. 24h
Please make your selection in the following order.
1. Select colour
2. Select quantity
Please make your selection in the following order.
1. Select colour












2. Select quantity
PU Sealer for Microcement (Optional) :

2K Bonding Primer

1K Putty Primer

DEEP PRIMER - Saturating Primer

Disposable Nitrile Gloves - 1 pair

Masking Tape

Roller Handle for 25cm Sleeve

Stirrer with Plastic Propeller Blade – 4,5x40cm

Paint Roller 25cm Flor

Paint tray 32x35cm (opt. exchangeable insert)

Venetian Smoothing Trowel 200 x 80mm

Venetian Trowel 240 x 100mm

Deep Primer Block Brush

Professional Smoothing Scraper 250mm

Professional Smoothing Scraper 450mm

Painter's spatula 100mm

Accessories Kit for DEEP PRIMER (8 items)

Accessories Kit for 2K PRIMER (24 items)

Accessories Kit for Microcement Walls (18 items)

Accessories Kit for PU Topcoat (14 items)

Painter's spatula 50mm

Painter's spatula 150mm

Venetian Dual Smoothing Trowel 235 x 120mm

Stirrer with Plastic Propeller Blade – 8cmx35cm

Decorative Concrete Optic
EPODEX 1K CONCRETE EFFECT is a special, single-component levelling compound for designing walls, tiles, kitchens, bathrooms, and other areas with a modern concrete look. The material can simply be mixed with water and applied to all surfaces with ease. Achieve a modern design in no time at all and if you get tired of the concrete look, you can simply sand the textured surface smooth by hand with sandpaper and paint over it.
Instructions for Use
- The substrate must be stable, dry, and free of dirt, separating agents, and unevenness.
- Sand off any unevenness.
- Mix CONCRETE EFFECT powder with water in a ratio of 5:2 by weight (e.g. 1kg EFFECT powder with 400ml water).
- Add approx. 2% WB PIGMENT, e.g. 2x 100g bottle for 5kg EFFECT powder to 2 litres of water.
- Apply material with a trowel. Working Time: Approx. 30min. Consumption Volume: approx. 1kg/m² per 1mm layer thickness. Drying Time: approx. 24hrs


Waterproof Concrete Look
1K CONCRETE EFFECT is waterproof and weather-resistant in combination with our polyurethane resin (PU) sealant. It is therefore ideal for showers and outdoor areas. The sealant layer is rolled onto the dried CONCRETE EFFECT. You will thus obtain a waterproof surface with a concrete look.