Microcement set for walls 3,5m² (9kg) to 301m² (742kg)

Microcement set for walls 3,5m² (9kg) to 301m² (742kg)

Microcement of premium quality for wall surfaces of all kinds indoors and outdoors. Living areas, commercial spaces, facades, and more.

5 out of 5 based on 11 customer ratings
(11 customer reviews )
Delivery time: 1-3 working days
  • Design filler applicable to all surfaces such as concrete, metal, plastic, wood, etc.
  • Material: Microcement fine/medium (Component A) and acrylic resin (Component B)
  • Properties: High load-bearing capacity, weatherproof, UV-stable, odourless
  • Areas of application: Interior & exterior as well as damp rooms with PU sealing
  • We recommend 2 layers: Layer 1 (medium): 1.2kg/m², Layer 2 (fine or medium): 1-1.2kg/m²
  • Curing time per layer at 20°C: approx. 8h – Final hardness: after approx. 7 days
  • Scope of delivery for 7m² (Fine-grained): 7kg medium + 5kg fine + 4kg acrylic resin + colourants
  • Scope of delivery for 7m² (Medium-grained): 14kg medium + 4kg acrylic resin + colourants
Product Properties
Application
Product Description Microcement, nano concrete, design levelling compound
Area of Application Area of Application Close to all walls and floors, furniture etc., walls, facades, stairs, industrial halls, cellars etc.
Field of Application Indoor & Outdoor use and damp rooms
Method of application Trowel
Self-levelling minimal; must be spread and smoothed out with a trowel
Consumption Quantity Floor Layer 1 (Large): 2.1kg/m², Layer 2 (Large or Medium): 1.2kg/m²
Consumption Quantity Wall Layer 1 (Medium): 1.2kg/m², Layer 2 (Medium or Fine): 1kg/m²
Odour development during application Low (according to amine)
Spray and Drip Behaviour Depending on processing consistency, dripping possible on wall surfaces
Application Temperature Substrate and ambient temperature must be min. 10°C and max. 30°C
Optimum Processing Temperature 20°C
Mixing ratio by weight Powder (A): Liquid (B) Fine: 100:35, Medium: 100:20, Large: 100:25
Pot Life at 20°C 120 minutes for 10kg
Recommended layer thickness fine 1mm; medium and large 1.5mm
Recommended number of layers min. 2 layers
Waiting time between layers max. 24 hours
Waiting time before painting over with another product after 48 hours
Primer on absorbent substrates Deep Primer 1K recommended
Primer on non-absorbent substrates Primer 2K recommended
Max. humidity level during application 60%
Technical Properties
Material Base Cement
Component A Powder for Microcement and Quartz
Component B Acrylic Resin in Water Dispersion
Gloss Level Satin matt. High gloss and dull matt possible with PU sealer
Consistency High viscosity, viscosity can be adjusted depending on the amount of LIQUID (B) added.
Coverage Highly Opaque
Surface Finish Highly durable, abrasion-resistant, hard-wearing, scrub-resistant
Scratch Resistance/Abrasion Resistance Reinforced by the application of PU and recommended for heavily used surfaces and wet areas
Compressive Strength after 7 days ≥ 12.0 MPa (EN 13892-2)
Compressive Strength after 28 days ≥ 20 MPa (EN 13892-2)
Flexural Strength after 7 days 4.0 MPa (EN 13892-2)
Flexural Strength after 28 days 7.0 MPa (EN 13892-2)
Fire resistance class Efl EN 13501-1
Shore Hardness ≥80
Elasticity1 Not elastic; glass fibre mesh must be incorporated on substrate susceptible to vibrate
Open to diffusion, breathable Yes (unless 2 or more layers of PU sealant are applied)
Application in Wet Areas Not recommended without Pu sealant in wet areas
Colour Fastness High
Colour Intensity High
Colour Appearance For walls: Fine/medium texture - For floors: Medium/Large texture
UV-resistant UV-Stable
Solvent-Free Yes
Plasticiser-Free Yes
VOC-Free Yes
Susceptible to abrasion marks and gloss spots (so-called writing effect) Low (Touch-Protect-System)
Environmentally Friendly Yes
Pigment Content 2-10% depending on desired colour intensity, recommended 2%
Density (g/cm³) 800 - 1300 kg/m³
Maximum Grain Size Large (450µm), Medium (330µm), Fine (80µm)
Dilutable Fine: max. 100:40, medium: max. 100:23, large: max. 100:28
Tool Cleaning Tool Cleaning Immediately after use with acetone/thinner
Chemical Resistance Acids, alkalis and chlorine should be avoided
Surface Cleaning Light surfactants (do not use acidic or chlorinated cleaners or alkaline solutions)
Storage Temperature Airtight, cool, dry, and frost-free
Max. Storage Temperature 25°C
Min. Storage Temperature 10°C
Minimum Shelf Life Unopened 12 months, Open 6 months
  1. If the substrate presents expansion joints, these must be taken into account when applying microcement. The expansion joint must either be reinforced with fibre glass mesh or a joint must be included into the microcement. Rooms larger than 50m² should always include expansion joints. Ignoring existing expansion joints or not including them when needed can lead to the microcement cracking.

    For damp rooms, surfaces in direct contact with water and heavily used surfaces (high mechanical stress, cleaning with aggressive cleaning agents, etc.), we recommend sealing the surface with EPODEX polyurethane resin (PU resin) in matt or glossy.

SKU: sys-micro-wand Categories: ,

Microcement Design

EPODEX microcement is a special levelling compound for designing floors, walls, stairs, tables, and other surfaces in a modern seamless design. Create a unique, contemporary ambience in no time at all. We will show you all microcement techniques, from exposed concrete with natural cavities to multi-coloured designs with 3D applications.

Universally Applicable

Our microcement is suitable for indoor and outdoor use and can be applied to almost all surfaces such as parquet, tiles, natural stone, plasterboard, metal, ceramic, marble, OSB and more. The material is highly resilient and UV-resistant. At the same time, it remains flexible and breathable.

Completely Waterproof

EPODEX microcement in combination with our polyurethane resin (PU) sealant is waterproof and weather resistant. It is therefore ideal for showers and outdoor areas. The sealing layer is finally rolled onto the hardened microcement. Depending on your requirements, you can choose between our matt and gloss PU sealant.
polyurethan harz boden resin a+
Equipment

Instructions for Use

Primer

  1. The substrate must be stable, dry, and free of dirt, separating agents, and coarse unevenness.
  2. Sand off any unevenness.
  3. Apply Primer:

    • For wall tiles, we recommend priming the tiles and joints with our special primer & putty and filling the joints with it.
    • For walls and floors without tiles, we recommend using our Deep Primer

    All primers can be found under the Accessories button on this product page.

  4. Allow the primer to dry.

Main Coating

  1. Mix microcement A components in medium grain size with the B component in the specified mixing ratio.
  2. Add WB pigment in the recommended quantity to colour the material.
  3. Spread the material with a trowel and then leave to dry
  4. Sand off any unevenness in the surface greater than 3 mm and vacuum up any sanding dust.
  5. Apply a second coat in the same way. Depending on the desired finish, the microcement can be applied in medium or fine grit.

Sealant

Note: For damp rooms, surfaces in direct contact with water and heavily used surfaces (high mechanical stress, cleaning with aggressive cleaning agents, etc.), we recommend sealing the surface with EPODEX polyurethane resin (PU resin) in matt or glossy.

  1. Mix PU resin and hardener in the specified mixing ratio and pour into a paint tray.
  2. Apply the material thinly with a foam roller in a crosswise motion and allow to harden. We recommend two coats.

Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.

Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.


Ingredients, Security & Danger statements

A-Komponenten (Microcement Medium) Danger: Contains: PORTLAND CEMENT CLINKER Causes serious eye damage Causes skin irritation. May cause respiratory irritation. May cause an allergic skin reaction. Keep out of reach of children. Avoid breathing dust. Wear protective gloves/ protective clothing / eye protection / face protection IF ON SKIN: Wash with plenty of water and soap. IF INHALED: Remove person to fresh air and keep comfortable for breathing IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing Immediately call a POISON CENTER or doctor If skin irritation or rash occurs: Get medical advice / attention. Take off contaminated clothing and wash it before reuse Dispose of contents/container to in accordance with local/regional/international regulations. Use only outdoors or in a well-ventilated area.

A-Components (Microcement Fine) Danger: Contains: PORTLAND CEMENT CLINKER Causes serious eye damage Causes skin irritation. May cause respiratory irritation. May cause an allergic skin reaction. Keep out of reach of children. Avoid breathing dust. Wear protective gloves/ protective clothing / eye protection / face protection IF ON SKIN: Wash with plenty of water and soap. IF INHALED: Remove person to fresh air and keep comfortable for breathing IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing Immediately call a POISON CENTER or doctor If skin irritation or rash occurs: Get medical advice / attention. Take off contaminated clothing and wash it before reuse Dispose of contents/container to in accordance with local/regional/international regulations. Use only outdoors or in a well-ventilated area.

B-Components (Microcement LIQUID B)If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing dust/mist/spray. Do not get in eyes, on skin, or on clothing. Wear protective gloves/eye protection. IF ON SKIN: Wash with plenty of water and soap. Dispose of contents/container to in accordance with local/regional/international regulations. Contains 1,2-Benzisothiazol-3(2H)-on Reaction mass of 5-Chlor-2-methyl-2H-isothiazol-3-on and 2-Methyl-2H-isothiazol-3-one. May produce an allergic reaction.

Customer reviews

Rated 5 out of 5 stars
11 reviews
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

Pictures from client projects

11 reviews for Microcement set for walls 3,5m² (9kg) to 301m² (742kg)

Add a review

Use one of the allowed file type: jpg,png,mp4.