+44 203 318 28 33 support@epodex.com
EPODEX – United Kingdom
  • Home
  • Shop
    • Epoxy Resin & Hardener
    • Paints
    • Epoxy Colours
    • Equipment
  • Resin Kits
    • Epoxy Resin
    • Epoxy Resin Crafts
    • Casting Resin
    • Epoxy Resin for Floor Coatings
    • Epoxy Resin for Table Tops, Worktops
    • Epoxy Resin Table
    • Synthetic Resin
    • Casting Resin
    • Coating Resin
    • Epoxy Primer
    • Epoxy Mortar
  • Paints
    • Wall Paint
    • Latex Paint
    • Chalk Paint
    • Tile Paint
    • Floor Paint
    • Concrete Paint
    • Stone Paint
    • Metal Paint
    • Plastic Paint
    • Furniture Paint
    • Wood Paint
    • Weatherproof paint
    • Wood Preservative
  • Varnishes
    • Wood Varnish
    • Tile Varnish
    • Furniture Lacquer
    • Metal Lacquer
  • Dyes & Pigments
    • Colouring Agents for epoxy resin
    • Colouring Agents for Varnishes/Paints
  • Equipment
  • Media Library
    • Blog
    • Video Instructions
    • Epoxy Resin Calculator
    • System Comparison Sheet for Epoxy Resin
    • FAQ – Frequently asked questions
en flag en
Select Currency: X
WOOCS v.2.3.7
0
cart

PRO System (Epoxy Resin + Hardener)

Home / Epoxy resin / Resin & Hardener / PRO System (Epoxy Resin + Hardener)
epoxy resin pro
gallery-image-aMlC
gallery-image-LJZF
gallery-image-QupK
gallery-image-hkTA
gallery-image-zH2C

PRO System (Epoxy Resin + Hardener)

Max. pouring height 2cm. For jewellery, model making, sealing of pictures, art and decoration and craft projects.

from £ 17.99 inc. VAT

5 out of 5 based on 9 customer ratings
(9 customer reviews)
Delivery time: 1-3 working days

The epoxy resin PRO system is ideal for coating surfaces and making jewellery and small objects. It can be poured up to 2 cm deep per layer. The Resin A-component and hardener B-component are included in each set, as well as the desired colour dye or pigments. Instructions for use can be found on this product page.

    • 0 £

    Epoxy resin systems
    Legend:
    ✓ Ideally suited. X Not suited. ~ Not ideal, but can be used.
    ECO PRO ECO+
    PRO+
    ECO MAX
    PRO MAX
    Mixing Ratio by Weight Resin (A) : Hardener (B) 100:50 100:50 100:50 100:50
    Applications
    Coating ✓ ✓ ~ ~
    Laminating ✓ ✓ ~ ~
    Sealing ✓ ✓ ~ ~
    Pouring ~ ✓ ✓ ✓
    Repairing ✓ ✓ ~ ~
    Glueing ✓ ~ ~ ~
    Application Areas
    Priming, Coating and Sealing of Floors (Industrial Floors, Garages, Interior Floors, Bath etc.) ✓ ✓ X X
    Coating and Sealing of Tables, Countertops and Other Furniture/Objects ✓ ✓ ~ ~
    Sealing of Pictures ✓ ✓ X X
    Pouring of Tables (River-Tables) ~ ~ ✓ ✓
    Creation of Jewellery and Small Castings up to 2cm Height ✓ ✓ ~ ~
    Casting of large pieces in one pour X X ✓ ✓
    Isolation of Electrical Circuits and Terminal Points ✓ X X X
    Use in Aircraft, Ship and Model Construction ✓ ✓ ~ ~
    Bonding and Sealing of Concrete, Wood, Plastic, Hard Foam, Natural Stone, Fibreglass and Other Materials ✓ ~ ~ ~
    Processing Characteristics
    Wood Turning ✓ ✓ ✓ ✓
    Sandable ✓ ✓ ✓ ✓
    Polishable ✓ ✓ ✓ ✓
    Max. Pouring Height per Process at 20°C1 (Number of Pourings: Unlimited)1cm 2cm 5cm 10cm
    Waiting Time until Further Casting at 20°C2 (Number of Pourings: Unlimited) Min. 6h Min. 12h Min. 48-72h Min. 72-96h
    Gelling Time and Pot Life at 20°C (Gel Timer TECAM) 25min (100g) 65min (145g) 6h (10kg) 8h (10kg)
    Min. Processing Temperature +15°C +15°C +15°C +15°C
    Max. Processing Temperature at Max. Casting Height +20°C (1cm) +20°C (2cm) +20°C (5cm) +20°C (10cm)
    Max. Processing Temperature at 1mm Coating Height +35°C +35°C +35°C +35°C
    Max. Relative Humidity during Processing 70% 70% 70% 70%
    Max. Material Shrinkage after Processing 1% 1% 1% 1%
    Processing Time (at 20°C)
    At Layer Height 0-3mm 60min 120min 360min 480min
    At Layer Height 1cm 25min 90min 360min 480min
    At Layer Height 2cm X 60min 360min 480min
    At Layer Height 5cm X X 240min 360min
    At Layer Height 10cm X X X 360min
    Touchable / Accessible on Foot / Demoldable (at 20°C)
    At Layer Height 0-3mm after 20h after 24h after 48-72h after 72-96h
    At Layer Height 1cm after 20h. after 20h. after 48-72h after 72-96h
    At Layer Height 2cm X after 20h after 48-72h after 72-96h
    At Layer Height 5cm X X after 48-72h after 72-96h
    At Layer Height 10cm X X X after 96h
    Completely Chemically Cured after 7 days after 7 days after 14 days after 14 days
    Technical Properties
    Transparent Resin ✓ ✓ ✓ ✓
    Crystal Clear Curing X ✓ X (ECO+)
    ✓ (PRO+)
    X (ECO M)
    ✓ (PRO M)
    Max. Possible UV Stabilisation3 X ✓ X (ECO+)
    ✓ (PRO+)
    X (ECO M)
    ✓ (PRO M)
    Self-Venting ✓ ✓ ✓ ✓
    Bubble Free ✓ ✓ ✓ ✓
    Self-Leveling ✓ ✓ ✓ ✓
    Solvent-Free ✓ ✓ ✓ ✓
    VOC Free4 X ✓ X (ECO+)
    ✓ (PRO+)
    X (ECO M)
    ✓ (PRO M)
    BPA Free5 ✓ ✓ ✓ ✓
    Plasticiser Free (Phthalate) ✓ ✓ ✓ ✓
    Resistant to Chemicals ✓ ✓ ✓ ✓
    Scratch Resistant6 ✓ ✓ ✓ ✓
    Doming Effect (Depth Effect) ✓ ✓ ✓ ✓
    Miscible with all EPODEX Colours (Except WB PIGMENT) ✓ ✓ ✓ ✓
    Suitable for Underfloor Heating ✓ ✓ ✓ ✓
    Suitable for Outdoor Use X ✓ X (ECO+)
    ✓ (PRO+)
    X (ECO M)
    ✓ (PRO M)
    High Adhesion ✓ ✓ ✓ ✓
    Density (g/cm)3 1.1 1.1 1.1 1.1
    Viscosity (mPa·s) 700 530 350 350
    Max. Heat Deflection Temperature7 65°C 65°C 65°C 65°C
    Min. Heat Deflection Temperature -30°C -30°C -30°C -30°C
    SHORE Hardness after Curing (D1) 87 82 80 80
    Storage Temperature 10-30°C 15-30°C 15-30°C 15-30°C
    Shelf Life 12 Months 12 Months 12 Months 12 Months
    Shelf Life after Opening8 6 Months 6 Months 6 Months 6 Months
    1. Casting above the maximum pouring height per process is not recommended. The resin may boil as a result of the reaction and yellowing, cracking and deformation can occur. By reducing the temperature (room, substrate, material temperature to e.g. 15 °C and reducing the area to e.g. 15x15cm, casting heights of up to 50cm can be achieved in one casting process
    2. There is no maximum time limit to pour the next layer.
    3. No epoxy resin is completely UV stabilised. However, high-quality raw materials and additives such as UV absorbers can increase UV protection. By using a top coat, you can increase UV stabilisation even further. Possible top coats are e.g. transparent polyurethane (PU) resins or lacquers which are painted or sprayed onto the epoxy coating as a finish.
    4. When properly used and completely cured, it is VOC free..
    5. According to formula without free BPA.
    6. Our epoxy resin systems have a high scratch resistance, but are not completely scratch-resistant. Scratch resistance can be increased by using a top coat. Possible top coats are e.g. transparent polyurethane (PU) resins or lacquers which are painted or sprayed onto the epoxy coating as a finish.
    7. The heat deflection temperature indicates up to which temperature the cured epoxy resin system remains mechanically stable. At higher temperatures, the cured epoxy can soften. By annealing (curing at higher temperatures >60°C), the heat resistance can be increased.
    8. If the lid of the container is closed directly after opening, the shelf life after opening is at least 6 months.

    • 17.99 £
    • 20.99 £
    • 22.99 £
Calculate quantity
Length (cm)
Width (cm)
Height (cm)
Required amount in KG KG
Required amount in g g
Calculate quantity
Equipment
SKU: sys-pro Category: Resin & Hardener
Equipment

EPODEX – PRO System

The PRO system is a high-quality coating and casting epoxy resin. It can be use for coating substrates such as floors and tables. It is also suitable as a sealant for artwork, tables and worktops. It is perfect to make jewellery and small decorative objects. The PRO system can be mixed with all our colour pigments.


Instructions for use

  1. Always start with an epoxy resin primer to avoid high material loss and blistering (layer thickness: 0,2-0,5mm). To do so, simply use a portion of the same clear epoxy resin (to prime floors and other coloured substrates we recommend to use our water-based epoxy resin EPOXY PRIMER system).
  2. Mix the PRO resin A-component with the PRO hardener B-component in a ratio of 2:1 (e.g. 2kg resin: 1kg hardener).
  3. Stir through the edge and bottom of the mixing cup as material will settle there. Ideally, pour into a clean mixing cup and mix again until the mixture is streak-free. This ensures that the resin A-component and hardener B-component are completely mixed together.
  4. Pour the resin-hardener mixture onto the surface to be coated immediately after mixing, as the product can start to boil in the mixing cup.
  5. Paint the epoxy primer with a paint roller or brush on the desired surface. We recommend rollers made of polyamide.
  6. Let the primer cure. The curing time varies depending on the temperature and layer thickness. Please refer to our information table under the “Learn more” button, which can be find on this product page.
  7. Continue with the main coating in the same way. If you select a colour on this product page, you will receive dyes or colour pigments in addition to the resin and hardener.
  8. To colour the main coating, mix the supplied colour with the resin A-component or with resin-hardener mixture. Adjust the colour intensity individually by adding more or less colour pigments.
  9. The epoxy resin can be touched and is accessible by foot after 16-24hours and is chemically fully cured after about 7 days.
  10. You can find more detailed information in our information table under the “Learn more” button on this product page.

Consumption volumes

Determine the required amount of resin needed with the help of our epoxy resin “Epoxy calculator” on this product page.

Recommended thicknesses when coating floors and other surfaces

  • Overall coating (primer + main coating): approx. 1,65-2,20kg/sqm for layer thicknesses of 1,5-2mm
  • Primer: approx. 0,22-0,55kg/sqm for layer thickness of 0,2-0,5mm
  • Main layer: approx. 1,10-1,65kg/sqm for layer thicknesses of 1-1,5mm

Recommended amount of colouring agent per kg of resin+hardener:

  • Powder pigments (Metallic, Neon und Glow in the dark): 1,5% (15g),
  • Transparent dyes (except white, black and grey): 60 drops (1,8g),
  • Transparent white, black and grey dyes: 20 drops dye (0,6g),
  • Semi-transparent dyes (except white): 40 drops (1,2g) of the desired colour und 20 drops (0,6g) of white dye,
  • Semi-transparent white: 60 drops of white dye (1,8g),
  • RAL solid colour: 1% (10g),
  • Glitter pigments: 1% (10g)

Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.

Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.


Ingredients

PRO (A-component) Attention: reaction product: bis- [4- (2,3-epoxypropoxi) phenyl] propane oxirane, mono [(C12-14-alkyloxy) methyl] derivative

PRO (B-component) Danger: Reaction product: 3-aminomethyl-3,5,5-trimethylcyclohexylamine.


Danger statements

A-componentDanger Causes skin irritation. Causes serious eye irritation. May cause an allergic skin reaction. Toxic to aquatic life with long lasting effects. Avoid breathing dust/fume/gas/mist/vapours/spray. Wear protective gloves/protective clothing/eye protection/face protection. Avoid release to the environment. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Dispose of contents and container in accordance with all local, regional, national or international regulations.

B-component Danger: Harmful if inhaled, swallowed or in contact with skin. Causes severe skin burns and eye damage. May cause allergic skin reactions. Harmful / Toxic to aquatic life with long lasting effects. Avoid release to the environment. Do not breathe dust/fume/gas/mist/vapours/spray. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or physician. IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell. Dispose of contents and container in accordance with all local, regional, national or international regulations.

Customer reviews

Rated 5 out of 5 stars
9 reviews
5 stars 9 100 %
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %
Add a review
Most recent reviews Most helpful reviews

9 reviews for PRO System (Epoxy Resin + Hardener)

show more

Add a review Cancel reply

Use one of the allowed file type: jpg,png,mp4.

    Facebook Twitter Linkedin Whatsapp Mail
    Related products
      concrete 2K Gebinde English
      CONCRETE PAINT 2K System (Resin+Hardener) from £ 26.99 inc. VAT see product
      pro max system resinhardene
      PRO MAX System (Epoxy Resin + Hardener) from £ 20.99 inc. VAT see product
      epoxy resin pro plus
      PRO+ System (Epoxy Resin + Hardener) from £ 17.99 inc. VAT see product
      eco max system resinhardener
      ECO MAX System (Epoxy Resin + Hardener) from £ 17.99 inc. VAT see product
    ×

    PRO System (Epoxy Resin + Hardener) has been added to your cart.

    There are 0 items in your cart.

    Cart Subtotal: £ 0.00

    View cart Checkout

    NEED HELP?
    We are available from Mon-Fri between 08:00 and 16:00
    +44 203 318 28 33

    WHATSAPP-SUPPORT
    If you have questions, our WhatsApp Support is always available!
    chat now

    TOP REVIEWS
    Satisfaction and quality are our top priority. Thanks for the many positive reviews

    SHIPPING £5.99
    The shipping costs for United Kingdom are £5.99 . The delivery time is usually between 1-3 days.

    EPODEX – United Kingdom © Copyright Epodex.uk
    +44 203 318 28 33 support@epodex.com
    EPODEX UK
    120 High Road, East Finchley
    London N2 9ED
    Access area
    • Shipping
    • Payment Methods
    • Cart
    • Checkout
    • Shipment tracking
    • My Account
    Information
    • Our Company
    • Contact Us
    • Right of Withdrawal
    • Terms and Conditions
    • Disclaimer
    • Data Protection Policy
    Select Currency: X
    WOOCS v.2.3.7
    Languages
    • en flag English
    • de flag Deutsch
    • us flag English (US)
    • fr flag Français
    • it flag Italiano
    • es flag Español
    • nl flag Nederlands
    • se flag Svenska
    • dk flag Dansk
    • pl flag Polskie
    Search products…