PRO+ System (Epoxy Resin + Hardener)

Max. Pouring height 5cm. For tables and other clear and coloured projects with large mould or castings

  • Can be used on all surfaces such as wood, concrete, glass and more
  • Max. thickness per layer: 5cm (heights up to 30cm possible for small castings)
  • Working time: approx. 6h, Curing time: 48-72h
  • Scope of delivery: Resin A and hardener B (Mixing ratio 2:1)
  • Conveniently select a colour to colour the clear epoxy resin
      Properties doubleChevron-black
      Properties

      Legend:

      Ideally suited.X Not suited.~ Not ideal, but can be used.
       ECOPROECO+
      PRO+
      ECO MAX
      PRO MAX
      Mixing Ratio by Weight Resin (A) : Hardener (B)100:50100:50100:50100:50

      Applications

      Coating~~
      Laminating~~
      Sealing~~
      Pouring~
      Repairing~~
      Glueing~~~

      Application Areas

      Priming, Coating and Sealing of Floors (Industrial Floors, Garages, Interior Floors, Bath etc.)XX
      Coating and Sealing of Tables, Countertops and Other Furniture/Objects~~
      Sealing of PicturesXX
      Pouring of Tables (River-Tables)~~
      Creation of Jewellery and Small Castings up to 2cm Height~~
      Casting of large pieces in one pourXX
      Isolation of Electrical Circuits and Terminal PointsXXX
      Use in Aircraft, Ship and Model Construction~~
      Bonding and Sealing of Concrete, Wood, Plastic, Hard Foam, Natural Stone, Fibreglass and Other Materials~~~

      Processing Characteristics

      Wood Turning
      Sandable
      Polishable
      Max. Pouring Height per Process11cm2cm5cm10cm
      Waiting Time until Further Casting26h12h48-72h72-96h
      Gelling Time and Pot Life25min (100g)65min (145g)6h (10kg)8h (10kg)
      Min. Processing Temperature15°C15°C15°C15°C
      Recommended processing temperature20°C20°C20°C20°C
      Max. Relative Humidity during Processing70%70%70%70%
      Max. Material Shrinkage1%1%1%1%

      Processing Time (at 20°C)

      At Layer Height 0-3mm60min120min360min480min
      At Layer Height 1cm25min90min360min480min
      At Layer Height 2cmX60min360min480min
      At Layer Height 5cmXX240min360min
      At Layer Height 10cmXXX360min

      Technical Properties

      Touchable / Accessible after24h24h48-72h96h
      Completely Chemically Cured after7 days7 days14 days14 days
      Transparent Resin
      Crystal Clear CuringXX (ECO+) 
      (PRO+)
      X (ECO M) 
      (PRO M)
      Max. Possible UV Stabilisation3XX (ECO+) 
      (PRO+)
      X (ECO M) 
      (PRO M)
      Self-Venting
      Bubble Free
      Self-Leveling
      Solvent-Free
      VOC Free4XX (ECO+) 
      (PRO+)
      X (ECO M) 
      (PRO M)
      BPA Free5
      Plasticiser Free (Phthalate)
      Resistant to Chemicals
      Scratch Resistant6
      Doming Effect (Depth Effect)
      Miscible with all EPODEX Colours (Except WB PIGMENT)
      Suitable for Underfloor Heating
      Suitable for Outdoor UseXX (ECO+) 
      (PRO+)
      X (ECO M) 
      (PRO M)
      High Adhesion
      Density (g/cm)31.11.11.11.1
      Viscosity (mPa·s)700530350350
      Max. Heat Deflection Temperature760°C60°C60°C60°C
      Min. Heat Deflection Temperature-30°C-30°C-30°C-30°C
      SHORE Hardness after Curing (D1)87828080
      Storage Temperature10-30°C15-30°C15-30°C15-30°C
      Shelf Life12 Months12 Months12 Months12 Months
      Shelf Life after Opening86 Months6 Months6 Months6 Months
      1. Casting above the maximum pouring height per process is not recommended. The resin may boil as a result of the reaction and yellowing, cracking and deformation can occur. By reducing the temperature (room, substrate, material temperature to e.g. 15 °C and reducing the area to e.g. 15x15cm, casting heights of up to 50cm can be achieved in one casting process
      2. There is no maximum time limit to pour the next layer.
      3. No epoxy resin is completely UV stabilised. However, high-quality raw materials and additives such as UV absorbers can increase UV protection. By using a top coat, you can increase UV stabilisation even further. Possible top coats are e.g. transparent polyurethane (PU) resins or lacquers which are painted or sprayed onto the epoxy coating as a finish.
      4. When properly used and completely cured, it is VOC free..
      5. According to formula without free BPA.
      6. Our epoxy resin systems have a high scratch resistance, but are not completely scratch-resistant. Scratch resistance can be increased by using a top coat. Possible top coats are e.g. transparent polyurethane (PU) resins or lacquers which are painted or sprayed onto the epoxy coating as a finish.
      7. The heat deflection temperature indicates up to which temperature the cured epoxy resin system remains mechanically stable. At higher temperatures, the cured epoxy can soften. By annealing (curing at higher temperatures >60°C), the heat resistance can be increased.
      8. If the lid of the container is closed directly after opening, the shelf life after opening is at least 6 months.

      1. Select colour

      Epoxy Resin transparent Clear EPODEX
      Epoxy Resin transparent blue EPODEX
      Epoxy Resin transparent red EPODEX
      Epoxy Resin transparent violet violet
      Epoxy Resin transparent yellow EPODEX
      Epoxy Resin transparent orange
      Epoxy Resin transparent pink pink
      Epoxy Resin transparent aqua buy
      Epoxy Resin transparent purple violet
      Epoxy Resin transparent green green
      Epoxy Resin transparent jewellery lime
      Epoxy Resin transparent varnish
      Show AlldoubleChevron

      2. Quantity of epoxy resin (Resin A + Hardener B)

      Quantity of epoxy resin (Resin A + Hardener B)
      chevronBottom
      Accessories
      Calculate quantity
      Video – River Table with Epodex

      Exceptional quality - directly from the manufacturer!

      With our premium epoxy resin, PRO+ you can reach high and realise pours up to 5cm height in one pouring process. Pour large river tables, lamps, and other tall projects in no time. 

      100% safe epoxy resins 

      Play it safe with your health! EPODEX epoxy resins are non-toxic (according to GHS06) and not hazardous to health (according to GHS08) according to the hazardous substance legislation of the EU and Switzerland. Our high-quality epoxy resins are 100% solvent-free and, according to the formulation, do not contain any free bisphenol A (i.e., BPA-free), which is harmful to health. This guarantees pleasant processing.

      River table epoxy resin resin
      bubble free Epoxy Resin EPODEX

      No. 1 casting resin with bubble-free curing

      No more annoying air bubbles and unevenness! Our epoxy resins self-vent at room temperature. This means that all air bubbles caused by mixing and pouring disappear on their own before the epoxy cures. You do not need a heat gun to remove the bubbles. This means that there is no risk of soot stains on your epoxy resin.

      Crystal clear & UV stabilised

      Don't compromise and choose the clearest epoxy resin on the market. Get a *money-back guarantee now: If you find a resin that is clearer than our PRO+ epoxy, we'll give you your money back! (*valid up to 30 days after order). Our PRO+ epoxy resin also offers the maximum possible UV protection. In this way, we effectively counteract the UV-induced yellowing of the casting resin.

      crystal clear Epoxy Resin EPODEX

      EPODEX - PRO+ System

      chevronBottom

      The epoxy resin PRO+ system is suitable for a wide range of applications. It is our high-quality casting resin designed to make river tables and other large items. The PRO+ system is miscible with all our colour pigment.

      Instructions for use

      chevronBottom
      1. Always start with an epoxy resin primer to avoid high material loss and blistering (layer thickness: 0,2-0,5mm). To do so, simply use a portion of the same clear epoxy resin. As an alternative, you can also use our PRO system for the primer. The PRO system has the advantage of being designed for thinner layers and cures within 16-24hours.
      2. Mix the PRO resin A-component with the PRO+ hardener B-component in a ratio of 2:1 (e.g. 2kg resin: 1kg hardener).
      3. Stir through the edge and bottom of the mixing cup as the material will settle there. Ideally, pour into a clean mixing cup and mix again until the mixture is streak-free. This ensures that the resin A-component and hardener B-component are completely mixed together.
      4. Paint the epoxy primer with a paint roller or brush on the desired surface. We recommend rollers made of polyamide. Let the primer cure.
      5. You can find more detailed information in our information table under the “Learn more” button on this product page.
      6. Continue with the main coating in the same way. If you select a colour on this product page, you will receive dyes or colour pigments in addition to the resin and hardener.
      7. To colour the main coating, mix the supplied colour with the resin A-component or with the resin-hardener mixture. Adjust the colour intensity individually by adding more or less colour pigments.

      Info: Epoxy resin is sensitive to any kind of moisture during curing (risk of amine blush formation, i.e. white patches in the top layer). For this reason, we recommend that you avoid any contact between water and the epoxy until it has cured completely (at least 7 days). For thin layers, cold temperatures (ambient, substrate, and resin temperatures below 20°C) and increased humidity, the time until the epoxy resin is fully cured may be extended.

      Consumption volumes

      chevronBottom

      Determine the required amount of resin needed with the help of our epoxy resin “Epoxy calculator” on this product page.

      Recommended amount of colouring agent per kg of resin+hardener:

      • Powder pigments (Metallic, Neon and Glow in the dark): 1,5% (15g),
      • Transparent dyes (except white, black and grey): 60 drops (1,8g),
      • Transparent white, black and grey dyes: 20 drops dye (0,6g),
      • Semi-transparent dyes (except white): 40 drops (1,2g) of the desired colour and 20 drops (0,6g) of white dye,
      • Semi-transparent white: 60 drops of white dye (1,8g),
      • RAL solid colour: 1% (10g),
      • Glitter pigments: 1% (10g)

      Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.

      Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.

      reviews

      5
      76%
      4
      24%
      3
      0%
      2
      0%
      1
      0%
      4.8
      Based on 153 reviews

      Customer Project Photos

      Review attachment by: lucReview attachment by: lucReview attachment by: lucReview attachment by: lucReview attachment by: lucReview attachment by: lucReview attachment by: lucReview attachment by: lucReview attachment by: lucReview attachment by: Madeleine
      James
      07.07.2025
      Country: GB
      I have used the 5cm resin several times now and have to say it’s very good quality. I like the long working time as it allows for the dispersion of air bubbles. Delivery is always quick and prices are competitive for a quality resin.
      luc
      28.06.2025
      Country: BE
      The epoxy resin from Epodex is of excellent quality. The product is very user-friendly and easy to work with. No air bubbles form during pouring, resulting in a smooth and professional finish. Moreover, the resin is beautifully clear, which is ideal for applications where optical clarity is important. Definitely recommended for both hobbyists and professional users!
      Review attachment by: luc
      Review attachment by: luc
      Review attachment by: luc
      Review attachment by: luc
      Review attachment by: luc
      Madeleine
      14.06.2025
      Country: DE
      My experience with the resin was positive and not at all as I thought; I paid a bit of a learning fee because my boards were somewhat uneven, but it still worked well and the result is impressive.
      Review attachment by: Madeleine
      Tourdeco
      03.06.2025
      Country: FR
      Very good resin, the working time is quite long, but you can't have everything. Regarding its fluidity, I find it quite good, but for turning work, which I do regularly, it is quite difficult to control. There are other brands more suited to this work, but much more expensive, so the quality-price ratio is acceptable. You just need to adapt it to the different types of wood on the lathe and not neglect its time in the vacuum chamber, at the risk of some disappointments, as shown in some photos. (see examples)
      Review attachment by: Tourdeco
      Review attachment by: Tourdeco
      Review attachment by: Tourdeco
      Review attachment by: Tourdeco
      Review attachment by: Tourdeco
      Roux Philippe
      16.05.2025
      Country: FR
      Sliding door for small living room convertible into bedroom, frame in ash and panel in black cherry walnut in resin.
      Review attachment by: Roux Philippe
      Review attachment by: Roux Philippe
      Tim Klußmeier
      14.05.2025
      Country: DE
      Apply means for engraving the numbers.
      Review attachment by: Tim Klußmeier

      Warning Danger

      Warning Danger Causes skin irritation. May cause an allergic skin reaction. Causes serious eye damage. Causes serious eye irritation. Toxic to aquatic life with long lasting effects. Harmful if swallowed or in contact with skin. The information on the product label must always be followed.

      piktogram-fisch-ausrufezeichen-reagenzglas.jpg
       

      Related Products

      Basket

      0 Item