Stone Aggregates for Stone Carpet

Instructions for Use

• Ensure the substrate is load-bearing, clean, and free from any substances that may prevent proper adhesion.
• Prime the substrate with our PU PRIMER.
• Let the PU PRIMER dry (approx. 25°C: 1h).
• If desired, install edge trims to define the area and create a clean edge. To fix the edge trim, you can use, for example, our assembly adhesive.
• Prepare a mixture of water and dish soap into a spray bottle.
• Mix the stone aggregates with the PU BINDER. To do so, add 6% PU BINDER to the dry-stone aggregates, for example, mix 12.5kg stone aggregates with 0.75kg PU BINDER.
• Pour the mixture immediately after mixing onto the surface to be coated.
• Spread the mixture with a trowel. Use the spray bottle containing the mixture of water and dish soap to clean the trowel and smooth the mixture easily.
• Let the stone carpet cure (approx. 24h at 25°C).
• For easier cleaning, the stone carpet can optionally be sealed with our PU FILLER. In wet rooms, such as the shower, or for pools, the use of our EPODEX PU FILLER is essential to create a waterproof surface. Apply the material with a spatula and then remove any excess using a rubber squeegee.