Metal Paint from EPODEX

EPODEX’s Metal Paint is the cost-effective solution to effectively protect your metal again rust and oxidation even in moist and harsh conditions.

see product

PU Waterproof Paint For Exterior & Interior Floors & Walls | 2K PU Paint

Suitable on concrete, wood, tiles, metal, ceramic, glass, and more.

from

€79.99

see product

PU Varnish Polyurethane For Exterior & Interior Floors & Walls | 2K PU Topcoat

Suitable on microcement, epoxy resin, concrete effect, metallic brush effect, concrete, wood, parquet, wooden floorboards, metal, ceramic, glass, and more.

from

€49.99

Our Promises

Hard-Wearing

Our metal paints withstand impact without any problems. Your paint won’t chip or flake.

Chemical Resistant

Our PU-based paints are resistant to chemicals such as oils, solvent, and mild acids.

Corrosion Resistant

Our metal paints aren’t water-based and can even protect untreated metal against rust.

Weatherproof

Our PU paints are completely UV and weather resistant, making them ideal outdoors.

How to Paint Metals

1. Sand with sandpaper or a wire brush. The metal should be clean, smooth, free of rust of flaky material.
2. Clean and degrease using EPODEX’s Pre-Cleaner and let the metal dry.
3. Mix the resin A-component with the hardener B-component in the right mixing ratio. For coloured coatings, add the EP Colour paste into the mixture.
4. Pour the mixture into a paint tray and apply it thinly with a roller in a criss-cross pattern.
5. Let the first coat cure. Then, mix and apply the second coat in the same way.

Pro Tip: Applying two coats of paint in a criss-cross motion ensures the paint is applied evenly and thoroughly. This reduces the chance of leaving small areas bare and unprotected.

Do I need to apply the PU Topcoat on the PU Paint?

No, applying the PU Topcoat on the PU Paint is not necessary.

Can I paint over rust?

We recommend removing rust before applying the paint to ensure proper adhesion.

Professional Finish with Easy Maintenance

EPODEX’s Metal Paint doesn’t only offer a clean and neat finish, it also eases the maintenance of your metals. Our PU-based paints form a flexible, non-porous, smooth film that stays clean longer and can be easily cleaned with common household products. Since our paint is flexible, it prevents cracking and peeling due to the metal movement, requiring less frequent touch ups.

Do I need rust protection under EPODEX’s metal paint?

Rust protection such as a zinc spray is not required but can still be applied if rust is of concern. For example, iron or steel in outdoor, marine, or industrial environments.

Can I use EPODEX’s Metal Paint to paint my boat or other metals in contact with water?

Yes, our PU Paint is 100% water resistant after complete chemical curing. It can be used to paint boats and other metals in permanent contact with water. Let the PU Paint cure completely (min. 7 days) before submerging.

Do you have metal paint in other colours?

Only the colours shown on our product page are available as sets. Our PU Paint is pre-tinted in white and only allows for pastel shades. Any of our EP Colour Paste can be added into the PU Paint. Please note that the colour of the PU Paint will be the pastel version of the pure EP Colour Paste.

Can I apply your PU Topcoat of top of another paint?

Yes, it is possible to use our PU Topcoat to protect another paint. Applying the PU Topcoat on top of another paint will give you all the advantages of EPODEX’s Metal Paint.