Concrete effect putty primer Microcement Floors

Decorative Concrete Plaster For Walls | Concrete Effect

Name: 1K Concrete Effect Filler - Modern Look for Walls
Brand: Epodex
SKU: sys-1k-beton-effect
Availability: InStock
Rating: 5 (23 reviews)

Decorative levelling compound with concrete optic. Cost-effective alternative to microcement. Ideal for rented flats as it is easy to sand and paint over afterwards.

€49.99

(23 Reviews)

Decorative levelling compound in fine to medium grain size for walls and tiled walls.
Can be used on all surfaces such as concrete, metal, plastic, wood, etc.
Can be applied to absorbent and non-absorbent substrates in layer thicknesses of 0-10cm
Areas of application: Indoors. Outdoors and damp areas with PU sealant
Mixing ratio: 5:2 (e.g. 1kg EFFECT powder with 400ml water)
Working time: approx. 30 minutes (fast setting)
Scope of delivery for 5m²: 5kg EFFECT powder + 2x 100g WB PIGMENT paste to dye the powder
Drying Time at 20°C: approx. 24h

1. Select colour

Show All

2. Select quantity

Select quantity

PU Sealer for Microcement (Optional) :

Select microcement sealer (type)

Select microcement sealer (quantity)

Decorative Concrete Optic

EPODEX 1K CONCRETE EFFECT is a special, single-component levelling compound for designing walls, tiles, kitchens, bathrooms, and other areas with a modern concrete look. The material can simply be mixed with water and applied to all surfaces with ease. Achieve a modern design in no time at all and if you get tired of the concrete look, you can simply sand the textured surface smooth by hand with sandpaper and paint over it.

Instructions for Use

The substrate must be stable, dry, and free of dirt, separating agents, and unevenness.
Sand off any unevenness.
Mix CONCRETE EFFECT powder with water in a ratio of 5:2 by weight (e.g. 1kg EFFECT powder with 400ml water).
Add approx. 2% WB PIGMENT, e.g. 2x 100g bottle for 5kg EFFECT powder to 2 litres of water.
Apply material with a trowel. Working Time: Approx. 30min. Consumption Volume: approx. 1kg/m² per 1mm layer thickness. Drying Time: approx. 24hrs

Waterproof Concrete Look

1K CONCRETE EFFECT is waterproof and weather-resistant in combination with our polyurethane resin (PU) sealant. It is therefore ideal for showers and outdoor areas. The sealant layer is rolled onto the dried CONCRETE EFFECT. You will thus obtain a waterproof surface with a concrete look.

Reviews

96%

5.0

Based On 23 Reviews

Customer Project Photos

Lisa Wahlster

09.07.2025

Country:

We chose the plaster in the wet room with a matte sealer and are absolutely satisfied. However, one should know that even the matte sealer has a slight shine. The floor was designed with epoxy resin from Epodex, and we are absolutely thrilled. Above all, the ease of cleaning without joints was decisive for us, but the fact that everything fits together so well and looks modern is an absolute plus. Epodex offers samples of all products, which was a great help in making the decision.

Helena

19.06.2025

Country:

Renovating my parents' old house with my husband has been a journey! Most of the bathroom tiles were broken or just looked so old, especially in the shower. This microcement was honestly the perfect solution, no need to rip out anything or make a huge mess, we just covered the tiles right over. Kept some of the floor tiles though, now the bathroom has this cool, eclectic vibe and loads of character. I’m honestly so happy with how easy it was. Big thanks to Vladimir for all the support and advice along the way!

Gemma H.

06.06.2025

Country:

Very satisfied with the result, I will buy it again.

Adriana

19.05.2025

Country:

Very easy to use :)

Natalie Schuster

03.05.2025

Country:

Before we built our house, we were not particularly skilled in crafts! Epodex was super easy to use. Our staircase is now a real highlight in our house!