Metal Paint | Metal Varnish | Red Colours

Metal Paint | Metal Varnish | Red Colours

Delivery time: 1-3 working days

EPODEX ACRYLIC PROTECT is a durable, satin finish, environmentally friendly acrylic varnish. It is ideal to seal and paint various material such as wood, metal, plastic and stone. Since this varnish is very rigid, we recommend applying it to materials that are not likely to warp. It can be used indoors or outdoors. Consumption Volumes: 110-130g/m². Instructions for use can be found on this product page.

Product Properties
Product Description Acrylic paint, wood paint, wood varnish, furniture paint, furniture varnish, plastic paint, plastic lacquer, metal paint, metal lacquer
Scope of Application Surfaces made of wood, Metal and plastic as well as on all structured substrates (e.g. also glass fabric or woodchip) indoors and outdoors. e.g. furniture, window frames, railings.
Field of Application Indoor and outdoor
Method of Application Paint, roll, spray
Consumption* approx. 120g/m²
Range/Yield* approx. 8m²/kg
Odour Unfolding during processing Low (odourless)
Spray and Drip Behaviour Very low (no splashes)
Processing Temperature min. 8°C object and ambient temperature
Optimal Processing Temperature 20°C
Technical Properties
Basic Compound Acrylic copolymer
Gloss Level satin matte
Consistency medium viscosity, (drip resistance ensures application on vertical surfaces)
Opacity according to DIN EN 13300* High (class 1-2, 6-8m² per litre)
Coating's Advantages *abrasion-resistant, hard-wearing, scrub-resistant
Wet abrasion resistance DIN EN 13300* <5μm to 20μm (class 2)
Water vapour diffusivity DIN EN 1062-1 Medium (Class 2; diffusion-open; sd value: <0.35m)
Diffusion-open, Breathable Yes
Colour Resistency High
Colour Intensity High
Paint's Structural Finish Fine structure, even coating pattern
UV-resistant Yes
Solvent-free No
Plasticiser-free Yes
VOC-free No
Susceptible to abrasion marks and shiny spots (so-called writing effect) Low (Touch-Protect-System)
Environmentally Friendly Yes
Proportion of Binder High (min. 20%)
Proportion of Pigment High (colour paste content: min. 10%)
Density (g/cm³) 1,1
pH Value approx. 8-9
Maximum Grain Size fine (≤ 100 µm)
Dilutable max. 5% water
Tool Cleaning Immediately after use with water
Storage cool, dry and frost-free
Max. Storage Temperature 25°C
*Consumption, coverage and opacity may vary depending on the substrate (wallpaper, woodchip, concrete, wood etc.), the tool used (foam roller, paint brush, etc.) and the choice of colour. Brilliant yellow, red and orange tones generally have a lower opacity. Several coats may be necessary here.
    • 1x Flat Brush 5cm
    • 1x Foam Rollers 5 & 10cm + handle
    • 1x Paint Tray 16cmx30cm
    • 1x Exchangeable insert for paint tray 16x30cm
    • 2x Sandpaper P180
    • 1x Sanding Block
    • 1x Stir Stick
    • 1x Masking Tape 3cmx50m

SKU: sys-acryl-p-rt-metall Categories: , ,


EPODEX ACRYLIC PROTECT is universally applicable. This varnish can be used for various indoor and outdoor applications.

This product can be used as:

  • Wood Varnish/Paint
  • Protective Lacquer for Wood
  • Metal Varnish/Paint
  • Plastic Varnish/Paint
  • Furniture Varnish/Paint

EPODEX ACRYLIC PROTECT is water-based, odourless, abrasion and weather resistant. It is ideal for painting doors, windows etc. as well as repainting previously painted or varnished surfaces. Due to its special protective formula, EPODEX ACRYLIC PROTECT provides long-term protection against moisture and UV rays.

Consumption Volumes:

110-130g/m² par coating on smooth and non-absorbent surfaces. On highly absorbent surfaces, we recommend priming the surface beforehand (e.g. with an undercoat) to prevent the varnish from being absorbed. To determine whether the surface is absorbent, test with a damp sponge. If the substrat has a dark colour, a primer should be applied.

Instructions for Use

  1. Sand the substrate to improve the varnish adhesion. To do so, use EPODEX sandpaper.
  2. Make sure the substrate is clean and free of grease. To do so, use EPODEX PRE-CLEANER.
  3. For uncoated substrates, it is recommended to apply a suitable primer (for wood, apply a coat of colourless EPODEX ACRYLIC PROTECT diluted with 5% water; for gypsum, apply e.g. a paint undercoat; for metal, apply e.g. zinc).
  4. Mix well before use.
  5. Apply a coat of varnish with a brush or foam roller and let the it dry (approx. 8h at 20°C).
  6. Reapply as many coats as required to achieve the desired opacity. We recommend applying ca. 2 coats.

Recommendations: Processing temperature: The room and substrate temperatures must be at least 8°C. Do not apply on heated surfaces or in direct sunlight. Drying problems may occur at low temperatures. To achieve a lower viscosity, dilute the varnish with up to 5% water. Clean tools with water immediately after use.

EU limit value: (Kat. A/d): 100g/l (2010), max.20g/l VOC

Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.

Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.

Ingredients, Security & Danger statements

ACRYLIC PROTECT Warning: 1,2-Benzisothiazol-3(2H)-on 2-Methyl-2H-isothiazol-3-one May cause an allergic skin reaction If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not get in eyes, on skin, or on clothing. Avoid release to the environment. IF ON SKIN: Wash with plenty of water and soap. Dispose of contents/container to in accordance with local/regional/international regulations.

Customer reviews


There are no reviews yet.

Be the first to review “Metal Paint | Metal Varnish | Red Colours”

Use one of the allowed file type: jpg,png,mp4.