1K PRIMER System

1K PRIMER is a one-component, water-based system. The system is used as a primer before applying epoxy resin to floors, tables and walls. This water-based system must be applied thinly in one or two coats of 0.3 mm. Depending on the temperature of the room and the material, the coating is dry after about 8 hours (at 20°C). Our 1K PRIMER can be mixed with all our WB PIGMENT colour pastes. 

Preparation

1. The surface to be covered must be dust-free and smooth. Unevenness must be smoothed in advance and holes filled with a levelling compound.
2. If the surface is very porous, it is recommended to apply a primer suitable for the material (e.g. a paint undercoat).
3. The undercoat prevents the 1K PRIMER and paint from being absorbed into the substrate.
4. Allow the undercoat to dry.

Primer

1. Mix the can well before use. To do this, shake the can or mix with a stir stick.
2. To colour the primer, add approx. 10% of WB PIGMENT to it (e.g. 100g of pigment to 1kg of 1K PRIMER) and mix again.
3. Pour the primer into a paint tray after mixing.
4. Apply the primer in a thin layer on the desired surface with a foam roller. We recommend a layer thickness of about 0,3mm.
5. Allow the coating to dry for approximately 8 hours (at 20°C).
6. Continue with the main coating. Use our ECO or PRO epoxy resin system as the main coating.
7. The main coating can be touched/walked on after approx. 24 hours and is fully chemically cured after approx. 7 days.