Sample Set for Microcement

Primer

1. The substrate must be stable, dry, and free of dirt, separating agents, and coarse unevenness.
2. Sand off any unevenness.
3. For tiled surfaces, we recommend priming the tiles with our 2K PRIMER for non-absorbent substrates and filling the joints with it.
4. Allow the primer to dry.

Main Coating

1. Mix microcement A components in medium grain size with the B component in the specified mixing ratio.
2. Add WB pigment in the recommended quantity to colour the material.
3. Spread the material with a trowel and then leave to dry
4. Sand off any unevenness in the surface greater than 3 mm and vacuum up any sanding dust.
5. Apply a second coat in the same way.

Sealant

Note: For damp rooms, surfaces in direct contact with water and heavily used surfaces (high mechanical stress, cleaning with aggressive cleaning agents, etc.), we recommend sealing the surface with EPODEX polyurethane resin (PU resin) in matt or glossy.

1. Mix PU resin and hardener in the specified mixing ratio and pour into a paint tray.
2. Apply the material thinly with a foam roller in a crosswise motion and allow to harden. We recommend two coats.

Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.

Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.