Tile Paint For Interior Floor & Wall Tiles | 2K Tile Paint
For heavily used wall and floor tiles as well as tiles with permanent water contact.
- Area of application: heavily stressed wall and floor tiles, as well as tiles with permanent water contact, e.g., in showers.
- Note: For wall tiles exposed to normal wear and tear, without permanent water contact, we recommend our more cost-effective Tile Paint 1K.
- Gloss level: satin matt
- Properties: odourless, abrasion-resistant, waterproof, UV-stabilised, high coverage
- Consumption: approx. 120g/m² per coat. We recommend approximately two coats.
- Working time: approx. 90 min. for 1kg
- Mixing ratio resin and hardener: 5:1 (e.g., 500g resin to 100g hardener)
- Proportion of Binder: high (min. 20%)
- Proportion of Pigment: high (colour paste content: min. 5%)
Please make your selection in the following order.
1. Select colour
2. Select quantity (m²) for 1 coat
Please make your selection in the following order.
Application | |
| Product Description | Tile paint, tile varnish |
| Scope of Application | Floor tiles and wall tiles with permanent water contact (e.g. shower). |
| Field of Application | Indoor |
| Method of Application | Paint, roll |
| Consumption* | approx. 120g/m² per coat. We recommend approximately two coats |
| Range/Yield* | approx. 8m²/kg |
| Odour Unfolding during processing | low (after amine) |
| Spray and Drip Behaviour | Very low (no splashes) |
| Processing Temperature | min. 8°C object and ambient temperature |
| Optimal Processing Temperature | 20°C |
| Mixing Ratio by Weight Resin (A): Hardener (B) | 5:1 |
| Pot Life at 20°C | 90 minutes at 1kg |
Technical Properties | |
| Basic Compound | Epoxy resin |
| Gloss Level | satin gloss |
| Consistency | medium viscosity, (drip resistance ensures processing on vertical surfaces) |
| Opacity according to DIN EN 13300* | High (class 1-2, 6-8m² per litre) |
| Coating's Advantages | *abrasion-resistant, hard-wearing, scrub-resistant |
| Wet abrasion resistance DIN EN 13300* | <5μm to 20μm (class 1) |
| Water vapour diffusivity DIN EN 1062-1 | Medium (Class 2; diffusion-open; sd-value: <0.5m) |
| Diffusion-open, Breathable | Yes |
| Colour Resistency | High |
| Colour Intensity | High |
| Paint's Structural Finish | Fine structure, even coating pattern |
| UV-resistant | Yes |
| Solvent-free | Yes |
| Plasticiser-free | Yes |
| VOC-free | Yes |
| Susceptible to abrasion marks and shiny spots (so-called writing effect) | Low (Touch-Protect-System) |
| Environmentally Friendly | Yes |
| Proportion of Binder | High (min. 20%) |
| Proportion of Pigment | High (colour paste content: min. 5%) |
| Density (g/cm³) | 1,4 |
| Maximum Grain Size | fine (≤ 100 µm) |
| Dilutable | Not dilutable |
| Tool Cleaning | Immediately after use with acetone/thinner |
| Storage | cool, dry and frost-free |
| Max. Storage Temperature | 25°C |
*Consumption, coverage and opacity may vary depending on the substrate (wallpaper, woodchip, concrete, wood etc.), the tool used (foam roller, paint brush, etc.) and the choice of colour. Brilliant yellow, red and orange tones generally have a lower opacity. Several coats may be necessary here.
1. Select colour
2. Select quantity (m²) for 1 coat
Accessories kit (17 items) (Optional) : 
EPODEX 2K Tile Paint
2K Tile Paint is a water-based, odourless epoxy resin-based paint. It consists of a resin component and a hardener component. Both components are mixed together before application.
The 2-component system is ideal for painting wall and floor tiles. The hard-wearing paint is easy to apply thanks to its excellent adhesion properties.
Paint your wall and floor tiles yourself now at an affordable cost. Get tips on colour schemes and modern furnishings from our living room designer in the following video!
Instructions for use - STEP BY STEP
- Sand the tiles with sandpaper.
- Cover/tape off surfaces that are not to be covered with a plastic drop cloth and masking tape.
- Pre-clean and degrease tiles with the EPODEX PRE-CLEANER.
- Mix resin (A-component) with hardener (B-component) in a ratio of 5:1 (e.g., 500g resin: 100g hardener). We recommend mixing small quantities of approx. 600g per coat, as the material is very reactive and thickens quickly (pot life: 90min. at 1kg).
- Colour the material with the WB pigment supplied and pour it into the paint tray.
- Apply material in a criss-cross pattern and allow to dry (approx. 12 hours at 20°C).
- We recommend approx. two coats.
- If desired, retouch the tile joints with the EPODEX grout pen and ruler.
EPODEX GROUT PEN - Order now!
With the EPODEX Grout Pen, you can paint your grout lines in white or in the classic shade of grey the pen is a special acrylic-based paint for colouring and refreshing tile grout.
Thanks to the flattened tip of the pen, the grout pen adapts to any grout line width and thus ensures quick and clean retouching of the tile grout lines in one single application. For a clean result, we recommend using a ruler.
Recommendations
Processing temperature: The room and substrate temperatures must be between 8°C and 25°C. Do not apply on heated surfaces or in direct sunlight. Drying problems may occur at low temperatures. Clean tools with water immediately after use.
EU limit value: (Cat. A/d): 140g/L (2010), max. 140g/L VOC
Customer Service
If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.
Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.
Reviews
Warning Danger
Warning Danger Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. Toxic to aquatic life with long lasting effects. Causes serious eye damage. Harmful to aquatic life with long lasting effects. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Contains epoxy compounds. May produce an allergic reaction. Contains epoxy constituents. May produce an allergic reaction. The information on the product label must always be followed.
Related Products
4.8
4.7
4.7
4.8
