2K Levelling Compound
For absorbent and non-absorbent substrates with unevenness, such as cracks, holes, or joints (e.g., tiled floors)
- 2K epoxy resin primer & levelling compound for filling and levelling floors.
- For priming, levelling, and raising floor surfaces as well as filling cracks, holes, joints etc.
- Optimum adhesion to all substrates (absorbent and non-absorbent), e.g. concrete, wood, tiles, etc.
- Areas of application: Indoors & outdoors as well as damp rooms
- Layer thicknesses from 0-3cm
- Processing time (at 20°C): approx. 35min.
- Loadable/processable (at 20°C): approx. 24 hours
- Mixing ratio: 100 parts quartz sand + 60 parts resin/hardener. (e.g. quartz sand 10kg + resin (A) 4kg + hardener (B) 2kg)
1. Select quantity
2K Primer & Levelling Compound
For absorbent and non-absorbent substrates with unevenness, such as cracks, holes, or joints (e.g., tiled floors), we recommend our 2in1 primer and leveling compound for filling/leveling.
Instructions for use
- The scope of delivery includes resin (A), hardener (B) and quartz sand. Mix the contents of the resin (A) with the contents of the hardener (B) in a mixing ratio of 2:1 (e.g. 2kg resin: 1kg hardener).
- Pass the stir stick through the rim and bottom of the mixing container, as the material will settle there. Ideally, transfer the mixture to a clean container and mix again. This will ensure that the resin (A) and hardener (B) are completely mixed together.
- Then mix the resin/hardener mixture with quartz sand. To do this, mix 100 parts quartz sand with 60 parts resin/hardener mixture. (e.g. quartz sand 10kg + resin (A) 4kg + hardener (B) 2kg).
- Then spread the material on the desired surface.
- The material is touchable/walkable after 20 hours and fully chemically cured after about 7 days.
Info: Epoxy resin is sensitive to any kind of moisture during curing (risk of carbamate formation, i.e. white patches in the top layer). For this reason, we recommend that you avoid any contact between water and the epoxy until it has cured completely (at least 7 days). For thin layers, cold temperatures (ambient, substrate, and resin temperatures below 20°C) and increased humidity, the time until the epoxy resin is fully cured may be extended.
Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.
Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.
Reviews
Warning Danger
Warning Danger Causes severe skin burns and eye damage. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. Harmful if inhaled. Toxic to aquatic life with long lasting effects. Harmful to aquatic life with long lasting effects. Contains epoxy constituents. May produce an allergic reaction. The information on the product label must always be followed.
Related Products
2K Bonding Primer
For smooth, non-absorbent substrates e.g., PVC, metal, tiles with shallow joints.
1K Putty Primer
For priming, filling, and smoothing wall tiles, as well as filling cracks, holes, joints, etc. Suitable for both absorbent and non-absorbent substrates.
