Epoxy Resin | All Colours
Please make your selection in the following order.
1. Select colour
2. Select epoxy resin system
3. Quantity of epoxy resin (Resin A + Hardener B)
Please make your selection in the following order.
Legend:
| ✓ Ideally suited. | X Not suited. | ~ Not ideal, but can be used. |
| ECO | PRO | ECO+ PRO+ | ECO MAX PRO MAX | |
|---|---|---|---|---|
| Mixing Ratio by Weight Resin (A) : Hardener (B) | 100:50 | 100:50 | 100:50 | 100:50 |
Applications | ||||
| Coating | ✓ | ✓ | ~ | ~ |
| Laminating | ✓ | ✓ | ~ | ~ |
| Sealing | ✓ | ✓ | ~ | ~ |
| Pouring | ~ | ✓ | ✓ | ✓ |
| Repairing | ✓ | ✓ | ~ | ~ |
| Glueing | ✓ | ~ | ~ | ~ |
Application Areas | ||||
| Priming, Coating and Sealing of Floors (Industrial Floors, Garages, Interior Floors, Bath etc.) | ✓ | ✓ | X | X |
| Coating and Sealing of Tables, Countertops and Other Furniture/Objects | ✓ | ✓ | ~ | ~ |
| Sealing of Pictures | ✓ | ✓ | X | X |
| Pouring of Tables (River-Tables) | ~ | ~ | ✓ | ✓ |
| Creation of Jewellery and Small Castings up to 2cm Height | ✓ | ✓ | ~ | ~ |
| Casting of large pieces in one pour | X | X | ✓ | ✓ |
| Isolation of Electrical Circuits and Terminal Points | ✓ | X | X | X |
| Use in Aircraft, Ship and Model Construction | ✓ | ✓ | ~ | ~ |
| Bonding and Sealing of Concrete, Wood, Plastic, Hard Foam, Natural Stone, Fibreglass and Other Materials | ✓ | ~ | ~ | ~ |
Processing Characteristics | ||||
| Wood Turning | ✓ | ✓ | ✓ | ✓ |
| Sandable | ✓ | ✓ | ✓ | ✓ |
| Polishable | ✓ | ✓ | ✓ | ✓ |
| Max. Pouring Height per Process1 | 1cm | 2cm | 5cm | 10cm |
| Waiting Time until Further Casting2 | 6h | 12h | 48-72h | 72-96h |
| Gelling Time and Pot Life | 25min (100g) | 65min (145g) | 6h (10kg) | 8h (10kg) |
| Min. Processing Temperature | 15°C | 15°C | 15°C | 15°C |
| Recommended processing temperature | 20°C | 20°C | 20°C | 20°C |
| Max. Relative Humidity during Processing | 70% | 70% | 70% | 70% |
| Max. Material Shrinkage | 1% | 1% | 1% | 1% |
Processing Time (at 20°C) | ||||
| At Layer Height 0-3mm | 60min | 120min | 360min | 480min |
| At Layer Height 1cm | 25min | 90min | 360min | 480min |
| At Layer Height 2cm | X | 60min | 360min | 480min |
| At Layer Height 5cm | X | X | 240min | 360min |
| At Layer Height 10cm | X | X | X | 360min |
Technical Properties | ||||
| Touchable / Accessible after | 24h | 24h | 48-72h | 96h |
| Completely Chemically Cured after | 7 days | 7 days | 14 days | 14 days |
| Transparent Resin | ✓ | ✓ | ✓ | ✓ |
| Crystal Clear Curing | X | ✓ | X (ECO+) ✓ (PRO+) | X (ECO M) ✓ (PRO M) |
| Max. Possible UV Stabilisation3 | X | ✓ | X (ECO+) ✓ (PRO+) | X (ECO M) ✓ (PRO M) |
| Self-Venting | ✓ | ✓ | ✓ | ✓ |
| Bubble Free | ✓ | ✓ | ✓ | ✓ |
| Self-Leveling | ✓ | ✓ | ✓ | ✓ |
| Solvent-Free | ✓ | ✓ | ✓ | ✓ |
| VOC Free4 | X | ✓ | X (ECO+) ✓ (PRO+) | X (ECO M) ✓ (PRO M) |
| BPA Free5 | ✓ | ✓ | ✓ | ✓ |
| Plasticiser Free (Phthalate) | ✓ | ✓ | ✓ | ✓ |
| Resistant to Chemicals | ✓ | ✓ | ✓ | ✓ |
| Scratch Resistant6 | ✓ | ✓ | ✓ | ✓ |
| Doming Effect (Depth Effect) | ✓ | ✓ | ✓ | ✓ |
| Miscible with all EPODEX Colours (Except WB PIGMENT) | ✓ | ✓ | ✓ | ✓ |
| Suitable for Underfloor Heating | ✓ | ✓ | ✓ | ✓ |
| Suitable for Outdoor Use | X | ✓ | X (ECO+) ✓ (PRO+) | X (ECO M) ✓ (PRO M) |
| High Adhesion | ✓ | ✓ | ✓ | ✓ |
| Density (g/cm)3 | 1.1 | 1.1 | 1.1 | 1.1 |
| Viscosity (mPa·s) | 700 | 530 | 350 | 350 |
| Max. Heat Deflection Temperature7 | 60°C | 60°C | 60°C | 60°C |
| Min. Heat Deflection Temperature | -30°C | -30°C | -30°C | -30°C |
| SHORE Hardness after Curing (D1) | 87 | 82 | 80 | 80 |
| Storage Temperature | 10-30°C | 15-30°C | 15-30°C | 15-30°C |
| Shelf Life | 12 Months | 12 Months | 12 Months | 12 Months |
| Shelf Life after Opening8 | 6 Months | 6 Months | 6 Months | 6 Months |
- Casting above the maximum pouring height per process is not recommended. The resin may boil as a result of the reaction and yellowing, cracking and deformation can occur. By reducing the temperature (room, substrate, material temperature to e.g. 15 °C and reducing the area to e.g. 15x15cm, casting heights of up to 50cm can be achieved in one casting process
- There is no maximum time limit to pour the next layer.
- No epoxy resin is completely UV stabilised. However, high-quality raw materials and additives such as UV absorbers can increase UV protection. By using a top coat, you can increase UV stabilisation even further. Possible top coats are e.g. transparent polyurethane (PU) resins or lacquers which are painted or sprayed onto the epoxy coating as a finish.
- When properly used and completely cured, it is VOC free..
- According to formula without free BPA.
- Our epoxy resin systems have a high scratch resistance, but are not completely scratch-resistant. Scratch resistance can be increased by using a top coat. Possible top coats are e.g. transparent polyurethane (PU) resins or lacquers which are painted or sprayed onto the epoxy coating as a finish.
- The heat deflection temperature indicates up to which temperature the cured epoxy resin system remains mechanically stable. At higher temperatures, the cured epoxy can soften. By annealing (curing at higher temperatures >60°C), the heat resistance can be increased.
- If the lid of the container is closed directly after opening, the shelf life after opening is at least 6 months.
1. Select colour
2. Select epoxy resin system
ECO (Height up to 1cm)
ECO+ (Height up to 5cm)
ECO MAX (Height up to 10cm)
PRO (Height up to 2cm)
PRO+ (Height up to 5cm)
PRO MAX (Height up to 10cm)
3. Quantity of epoxy resin (Resin A + Hardener B)
Disposable Nitrile Gloves - 1 pair
Plastic Stir Stick- 25cm
Mixing Cups 385ml - 2300ml
Sandpaper Waterproof 230x280mm
Sanding Block - Made of Cork
Masking Tape
Roller Handle for 4-11cm Sleeve
Roller Handle for 25cm Sleeve
Separating Agent Spray for Epoxy Resin 400ml
Separating Tape for Epoxy Resin
PRE-CLEANER 400ml
EPODEX WAX – 200ml
Stirrer with Plastic Propeller Blade – 8cmx35cm
POLISH - Polishing Paste for Epoxy Resin 200ml
Foam Roller Sleeve 10cm + Handle
Foam Roller Sleeve 10cm
Foam Roller Sleeve 25cm
Foam Roller Sleeve 25cm + Handle
Foam Roller Sleeve 5cm
Foam Roller Sleeve 5cm + Handle
Exceptional quality - Directly from the manufacturer!
With our six premium epoxy resins, you can reach high and realise pours up to 10cm height in one pouring process. Pour large river tables, lamps, and other tall projects in no time. No matter which project, we can assist you. Our epoxy resins are mixable with all our colours.
100% safe epoxy resins
Play it safe with your health! EPODEX epoxy resins are non-toxic (according to GHS06) and not hazardous to health (according to GHS08) according to the hazardous substance legislation of the EU and Switzerland. Our high-quality epoxy resins are 100% solvent-free and, according to the formulation, do not contain any free bisphenol A (i.e., BPA-free), which is harmful to health. This guarantees pleasant processing.
No. 1 casting resin with bubble-free curing
No more annoying air bubbles and unevenness! Our epoxy resins self-vent at room temperature. This means that all air bubbles caused by mixing and pouring disappear on their own before the epoxy cures. You do not need a heat gun to remove the bubbles. This means that there is no risk of soot stains on your epoxy resin.
Casting 3D unique objects
Do you want to inspire your family, friends and guests with 3D surfaces and cast-in objects? With our clear epoxy resin set, you can easily cast in coins, clock wheels, plastic flowers, and many other things. Try it yourself!
EPODEX Epoxy Resin | All Colours
EPODEX epoxy resin is ideal for a variety of applications. From construction, through electrical engineering and furniture coating. Coat your floors, tabletops and other items. Seal pictures or make your own jewellery. No matter your project, we can help you achieve it. Our epoxy resin systems are miscible with all our colours. Application examples can be foand in the gallery.
Instructions for use
- Always start with an epoxy resin primer to avoid high material loss and blistering (layer thickness: 0,2-0,5mm). To do so, simply use a portion of the same clear epoxy resin. Mix the resin A-component with the hardener B-component in a ratio of 2:1 (e.g. 2kg resin: 1kg hardener).
- Stir through the edge and bottom of the mixing cup as the material will settle there. Ideally, pour into a clean mixing cup and mix again until the mixture is streak-free. This ensures that the resin A-component and hardener B-component are completely mixed together.
- Pour the resin-hardener mixture onto the surface to be coated immediately after mixing, as the product may boil in the mixing cup depending on the system and the amount of substance.
- Paint the epoxy primer with a paint roller or brush on the desired surface. We recommend rollers made of polyamide. Let the primer cure.
- Continue with the main coating in the same way. Processing times, pouring heights and curing times vary depending on the epoxy resin system selected and the application. You can find more detailed information in our information table under the info button "Learn more" on this page.
Epoxy resin is sensitive to any kind of moisture during curing (risk of amine blush formation, i.e. white patches in the top layer). For this reason, we recommend that you avoid any contact between water and the epoxy until it has cured completely (at least 7 days). For thin layers, cold temperatures (ambient, substrate, and resin temperatures below 20°C) and increased humidity, the time until the epoxy resin is fully cured may be extended.
Consumption volumes
Determine the required amount with the help of our epoxy resin "Epoxy calculator" on this page.
Recommended thicknesses when coating floors and other surfaces
- Overall coating (primer + main coating): approx. 1,65-2,20kg/sqm for layer thicknesses of 1,5-2mm
- Primer: approx. 0,22-0,55kg/sqm for layer thickness of 0,2-0,5mm
- Main layer: approx. 1,10-1,65kg/sqm for layer thicknesses of 1-1,5mm
- Powder pigments (Metallic, Neon and Glow in the dark): 1,5% (15g),
- Transparent dyes (except white, black and grey): 60 drops (1,8g),
- Transparent white, black and grey dyes: 20 drops dye (0,6g),
- Semi-transparent dyes (except white): 40 drops (1,2g) of the desired colour and 20 drops (0,6g) of white dye,
- Semi-transparent white: 60 drops of white dye (1,8g),
- RAL solid colour: 1% (10g),
- Glitter pigments: 1% (10g)
Customer Service:
If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.
Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.
Ingredients, Security & Danger statements
Warning: 2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane Reaction mass of 2,2’-[methylenebis(4,1-phenyleneoxymethylene)]dioxirane and [2-({2-[4-(oxiran-2-ylmethoxy)benzyl]phenoxy}methyl)oxirane and [2,2’-[methylenebis(2,1-phenyleneoxymethylene)]dioxirane Oxirane, mono((C12-14-alkyloxy)methyl)derivs Causes skin irritation Causes serious eye irritation May cause an allergic skin reaction Toxic to aquatic life with long lasting effects Avoid breathing dust/fume/gas/mist/vapours/spray. Avoid release to the environment. Wear protective gloves/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation or rash occurs: Get medical advice/attention. Dispose of contents/container to in accordance with local/regional/international regulations. Contains epoxy constituents. May produce an allergic reaction.
B-Components (ECO) Danger: Reaction products of 3-aminomethyl-3,5,5-trimethylcyclohexylamine and 4,4’-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane m-phenylenebis(methylamine) Salicylic acid Causes severe skin burns and eye damage. May cause an allergic skin reaction Harmful to aquatic life with long lasting effects Do not breathe dust/fume/gas/mist/vapours/spray. Wear protective gloves/eye protection/face protection. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Specific treatment (see on this label). Take off contaminated clothing and wash it before reuse. Store locked up. Dispose of contents/container to in accordance with local/regional/international regulations.
B-Components (ECO+) Danger: Polyoxypropylene triamine Harmful if swallowed or in contact with skin Causes serious eye damage. Toxic to aquatic life with long lasting effects Wash skin thoroughly after handling. Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of water. Call a POISON CENTRE/doctor if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. Collect spillage.
B-Components (ECO MAX) Danger: Polyoxypropylene triamine Harmful if swallowed or in contact with skin Causes serious eye damage. Toxic to aquatic life with long lasting effects Wash skin thoroughly after handling. Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of water. Call a POISON CENTRE/doctor if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. Collect spillage.
A-Components (PRO) Warning: Bis-[4-(2,3-epoxipropoxi)phenyl]propane Oxirane, mono[(C12-14-alkyloxy)methyl] derivative Pentamethyl piperidyl sebazate Causes skin irritation May cause an allergic skin reaction Causes serious eye irritation Toxic to aquatic life with long lasting effects Avoid breathing dust/fume/gas/mist/vapours/spray. Wash skin thoroughly after handling. Avoid release to the environment. Wear protective gloves/eye protection/face protection. If skin irritation or rash occurs: Get medical advice/attention. Collect spillage.
B-Components (PRO) Danger: Polyoxypropylene triamine 3-aminomethyl-3,5,5-trimethylcyclohexylamine adduct IA (epoxy-amine adduct) Harmful if swallowed Causes severe skin burns and eye damage. May cause an allergic skin reaction Toxic to aquatic life with long lasting effects Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. Collect spillage.
B-Components (PRO+) Danger: Polyoxypropylene triamine Harmful if swallowed or in contact with skin Causes serious eye damage. Toxic to aquatic life with long lasting effects Wash skin thoroughly after handling. Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of water. Call a POISON CENTRE/doctor if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. Collect spillage.
B-Components (PRO MAX) Danger: Polyoxypropylene triamine Harmful if swallowed or in contact with skin Causes serious eye damage. Toxic to aquatic life with long lasting effects Wash skin thoroughly after handling. Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of water. Call a POISON CENTRE/doctor if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. Collect spillage.
Reviews
Related Products
5.0
PRO System (Epoxy Resin + Hardener)
Max. pouring height 2cm. For jewellery, model making, sealing of pictures, art and decoration and craft projects.
4.7
ECO System (Epoxy Resin + Hardener)
Max. Pouring height 1cm. For GRP, floors, table tops, furniture and all coatings, repairs, and sealants.
4.7
