Anthracite Grey - Epoxy Floor to Pour on

Anthracite Grey – Epoxy Floor to Pour on

4.7678571428571 out of 5 based on 56 customer ratings
(56 customer reviews )
Delivery time: 1-3 working days
  • Can be used on all surfaces such as concrete, screed, wood and more
  • Layer thickness: approx. 1.5mm
  • Working time: primer 120min., main coat: 120min.
  • Curing time: Primer 8-12hrs., main coat 16-24hrs.
  • Scope of delivery: Primer + epoxy resin and hardener + colour paste
  • Application instructions can be found on this product page

Select your colour

Selection : Epoxy Floor to Pour on

Shop all colours

    PU Topcoat

    For a more scratch-resistant surface with increased UV protection, we recommend ordering our satin-matt 2-component polyurethane resin (2K PU resin) as a topcoat. The PU resin is highly durable and can be easily rolled onto the epoxy resin, wood, cement, concrete and much more with a foam roller in two thin layers (with max.150µm layer thickness).


    • Can be used as epoxy, wood, concrete, microcement, acrylic, parquet, laminate and more
    • Properties: odourless, highly durable, waterproof, UV-stable, for indoor and outdoor use.
    • For rolling on in thin layers (roll coats): Max.150µm/coat
    • Consumption: approx.100g/m²
    • Pot life/processing time: approx. 60min at 1kg material and 20°C
    • Curing time: 20-24hrs.
    • Scope of delivery: Resin A and hardener B
    • Mixing ratio resin and hardener: 10:1 (e.g. 1.000g resin to 100g hardener)
SKU: EB-R-1025 Categories: ,

Design flooring & epoxy resin floor sealants

With our two-component epoxy resin sets for floors, you are always on the safe side. No matter whether it's a design floor or a classic floor seal for cellars and garages. Conveniently select your desired colour, determine the squareness and off you go! Get unique stone, marble and granite looks and save money compared to real marble stone. What are you waiting for? - Give your home a unique look!

100% safe epoxy resins

Play it safe with your health! EPODEX epoxy resins are non-toxic (according to GHS06) and non-hazardous to health (according to GHS08) according to the hazardous substance legislation of the EU and Switzerland. Our high-quality epoxy resins are 100% solvent-free and, according to the formulation, do not contain any free bisphenol A (i.e., BPA-free), which is harmful to health. This guarantees pleasant processing.
flooring epoxy resin

No. 1 coating resin with bubble-free curing

Our epoxy resins self-vent at room temperature. This means that any air bubbles created by mixing and pouring will disappear on their own before the epoxy cures. Thanks to our unique formula, you do not need a spiked deaeration roller or other equipment to remove the bubbles.
blasenfrei epoxidharz epodex flooring 2

Cast 3D Pennyfloor yourself!

You want to cast a 3D floor? No problem, our clear epoxy resin set allows you to create a crystal-clear coating! Pour in coins and other things and wow your friends and guests with an absolute eye-catcher!
pennyfloor epoxidharz epodex flooring 1

Instructions for Use Anthracite Grey


  1. We recommend a working temperature of approx. 20°C.
  2. The floor should be dust-free, clean, and even. Level out holes, unevenness, and slopes in advance with levelling compound.
  3. Always start with our EPOXY PRIMER (primer).
  4. Pour the material into a paint tray after mixing.
  5. Roll the material onto the desired surface with a paint roller.
  6. Allow the primer to dry (approx. 8-12 hours).

Main Coat

  1. Use our ECO epoxy resin system (resin + hardener) for the main coating.
  2. Mix the resin (A) with the hardener (B) in a ratio of 2:1 by weight (e.g., 1kg A + 0,5kg B).
  3. Ideally, transfer the material to a clean mixing bucket and stir again. This will ensure that the resin (A) and hardener (B) are completely mixed together.
  4. Add the supplied colour paste Anthracite Grey to the resin-hardener mixture. We recommend a colour portion of approx. 1%, e.g., 10g colour paste to 1kg resin + hardener.
  5. Pour the material onto the surface immediately after mixing, as the product can boil up in the mixing bucket.
  6. Apply the material with a squeegee and foam roller flooding the entire floor. We recommend a layer thickness of 1.5mm.
  7. The main coating can be walked on after approx. 20 hours and is completely chemically cured after approx. 7 days.

Info: Epoxy resin is sensitive to any kind of moisture during curing (risk of amine blush formation, i.e. white patches in the top layer). For this reason, we recommend that you avoid any contact between water and the epoxy until it has cured completely (at least 7 days). For thin layers, cold temperatures (ambient, substrate, and resin temperatures below 20°C) and increased humidity, the time until the epoxy resin is fully cured may be extended.

Consumption volumes

Determine the required amount of resin needed with the help of our epoxy resin “Epoxy calculator” on this product page.

Recommended thicknesses when coating floors and other surfaces

  • Overall coating (primer + main coating): approx. 1.9kg/sqm for layer thicknesses of 1.7mm
  • Primer: approx. 0.2kg/sqm for layer thickness of 0.2-0.3mm
  • Main layer: approx. 1.65kg/sqm for layer thicknesses of 1.5mm

Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.

Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.

Ingredients, Security & Danger statements

A-Components (ECO) Warning: 2,2′-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane Reaction mass of 2,2’-[methylenebis(4,1-phenyleneoxymethylene)]dioxirane and [2-({2-[4-(oxiran-2-ylmethoxy)benzyl]phenoxy}methyl)oxirane and [2,2’-[methylenebis(2,1-phenyleneoxymethylene)]dioxirane Oxirane, mono((C12-14-alkyloxy)methyl)derivs Causes skin irritation Causes serious eye irritation May cause an allergic skin reaction Toxic to aquatic life with long lasting effects Avoid breathing dust/fume/gas/mist/vapours/spray. Avoid release to the environment. Wear protective gloves/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation or rash occurs: Get medical advice/attention. Dispose of contents/container to in accordance with local/regional/international regulations. Contains epoxy constituents. May produce an allergic reaction.

B-Components (ECO) Danger: Reaction products of 3-aminomethyl-3,5,5-trimethylcyclohexylamine and 4,4’-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane m-phenylenebis(methylamine) Salicylic acid Causes severe skin burns and eye damage. May cause an allergic skin reaction Harmful to aquatic life with long lasting effects Do not breathe dust/fume/gas/mist/vapours/spray. Wear protective gloves/eye protection/face protection. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Specific treatment (see on this label). Take off contaminated clothing and wash it before reuse. Store locked up. Dispose of contents/container to in accordance with local/regional/international regulations.

EPOXY PRIMER Warning: 1,2-Benzisothiazol-3(2H)-on 2-Methyl-2H-isothiazol-3-one May cause an allergic skin reaction If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not get in eyes, on skin, or on clothing. Avoid release to the environment. IF ON SKIN: Wash with plenty of water and soap. Dispose of contents/container to in accordance with local/regional/international regulations.

Customer reviews

Rated 4.7678571428571 out of 5 stars
56 reviews
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

Pictures from client projects

56 reviews for Anthracite Grey – Epoxy Floor to Pour on

Add a review

Use one of the allowed file type: jpg,png,mp4.