TILE PAINT 1K | All Colours
- Area of application: Normally stressed wall tiles without permanent water contact.
- Note: For heavily stressed wall and floor tiles, as well as tiles with permanent water contact, we recommend our waterproof Tile Paint 2K.
- Gloss level: satin
- Properties: low odour, abrasion-resistant, UV-resistant, high coverage
- Consumption: 120-150g/m²
- Working time: approx. 180min.
Please make your selection in the following order.
1. Select colour
2. Select quantity (m²) for 1 coat
Please make your selection in the following order.
Application | |
| Product Description | Concrete paint, stone paint, wall paint, floor paint |
| Scope of Application | Normally stressed walls and floors made of concrete, cement, plaster, wood and masonry |
| Field of Application | Indoor and covered outdoor |
| Method of Application | Paint, roll, spray |
| Consumption* | approx. 140g/m² |
| Range/Yield* | approx. 7m²/kg |
| Odour Unfolding during processing | Low (odourless) |
| Spray and Drip Behaviour | Very low (no splashes) |
| Processing Temperature | min. 8°C object and ambient temperature |
| Optimal Processing Temperature | 20°C |
| Mixing Ratio by Weight Resin (A): Hardener (B) | No mixing ratio, as one-component product |
| Pot Life at 20°C | No pot life available |
Technical Properties | |
| Basic Compound | Pure acrylate |
| Gloss Level | satin gloss |
| Consistency | Viscous (drip resistance, ensures easy and clean application) |
| Opacity according to DIN EN 13300* | High (class 1-2, 6-8m² per litre) |
| Coating's Advantages | *abrasion-resistant, hard-wearing, scrub-resistant |
| Wet abrasion resistance DIN EN 13300* | <5μm to 20μm (class 2) |
| Water vapour diffusivity DIN EN 1062-1 | Medium (Class 2; diffusion-open; sd-value: <0.5m) |
| Diffusion-open, Breathable | Yes |
| Colour Resistency | High |
| Colour Intensity | High |
| Paint's Structural Finish | Fine structure, even coating pattern |
| UV-resistant | Yes |
| Solvent-free | No |
| Plasticiser-free | Yes |
| VOC-free | No |
| Susceptible to abrasion marks and shiny spots (so-called writing effect) | Low (Touch-Protect-System) |
| Environmentally Friendly | Yes |
| Proportion of Binder | High (min. 20%) |
| Proportion of Pigment | High (colour paste content: min. 10%) |
| Density (g/cm³) | 1,3 |
| pH-value | approx. 8.2-9.2 |
| Maximum Grain Size | fine (≤ 100 µm) |
| Dilutable | as primer max. 20% water |
| Tool Cleaning | Immediately after use with water |
| Storage | cool, dry and frost-free |
| Max. Storage Temperature | 25°C |
*Consumption, coverage and opacity may vary depending on the substrate (wallpaper, woodchip, concrete, wood etc.), the tool used (foam roller, paint brush, etc.) and the choice of colour. Brilliant yellow, red and orange tones generally have a lower opacity. Several coats may be necessary here.
1. Select colour
2. Select quantity (m²) for 1 coat
Accessories kit (15 items) (Optional) : 
EPODEX 1K Tile Paint
EPODEX 1K Tile Paint is a water-based, low-odour acrylic paint. The paint is ideal for coating wall tiles. The good adhesion properties ensure easy application and a perfect result.
Paint your wall tiles yourself now at a low cost. For more inspiration on which colour to use and matching accessories, watch our designer’s tutorial!
Instructions for use - STEP BY STEP
- Sand the tiles with sandpaper.
- Cover/tape off surfaces that are not to be covered with a plastic drop cloth and masking tape.
- Pre-clean and degrease tiles with the EPODEX PRE-CLEANER.
- Mix the tile paint thoroughly.
- Apply the material and allow it to dry. Working time: approx. 2 hours at 20°C.
- Apply further coats until the desired opacity is achieved. We recommend approx. two coats.
- If desired, retouch the tile joints with the EPODEX grout pen and ruler.
EPODEX GROUT PEN - Order now!
With the EPODEX Grout Pen, you can paint your grout lines in white or in the classic shade of grey the pen is a special acrylic-based paint for colouring and refreshing tile grout.
Thanks to the flattened tip of the pen, the grout pen adapts to any grout line width and thus ensures quick and clean retouching of the tile grout lines in one single application. For a clean result, we recommend using a ruler.
Recommendations
Processing temperature: The room and substrate temperatures must be at least 8°C. Do not apply on heated surfaces or in direct sunlight. Drying problems may occur at low temperatures. To achieve a lower viscosity, dilute the paint with up to 5% water. Clean tools with water immediately after use.
EU limit value: (Cat. A/d): 140g/L (2010), max. 140g/L VOC
Customer Service
If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.
Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.
Ingredients, Security & Danger statements
TILE PAINT 1K Warning: 1,2-Benzisothiazol-3(2H)-on 2-Methyl-2H-isothiazol-3-one May cause an allergic skin reaction If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not get in eyes, on skin, or on clothing. Avoid release to the environment. IF ON SKIN: Wash with plenty of water and soap. Dispose of contents/container to in accordance with local/regional/international regulations.
TILE PAINT 1K Polar White Warning: 1,2-Benzisothiazol-3(2H)-on 2-Methyl-2H-isothiazol-3-one May cause an allergic skin reaction If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not get in eyes, on skin, or on clothing. Wear protective gloves/eye protection. IF ON SKIN: Wash with plenty of water and soap. Dispose of contents/container to in accordance with local/regional/international regulations. Contains titanium dioxide: Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
TILE PAINT 1K PASTEL Warning: 1,2-Benzisothiazol-3(2H)-on 2-Methyl-2H-isothiazol-3-one May cause an allergic skin reaction If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not get in eyes, on skin, or on clothing. Wear protective gloves/eye protection. IF ON SKIN: Wash with plenty of water and soap. Dispose of contents/container to in accordance with local/regional/international regulations. Contains titanium dioxide: Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
TILE PAINT 1K PASTEL+ Warning: 1,2-Benzisothiazol-3(2H)-on 2-Methyl-2H-isothiazol-3-one May cause an allergic skin reaction If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not get in eyes, on skin, or on clothing. Wear protective gloves/eye protection. IF ON SKIN: Wash with plenty of water and soap. Dispose of contents/container to in accordance with local/regional/international regulations. Contains titanium dioxide: Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
Reviews
Warning Danger
Warning May cause an allergic skin reaction. Harmful to aquatic life with long lasting effects. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. The information on the product label must always be followed.
Related Products
4.7
4.8
4.7
TILE PAINT 2K | All Colours
For heavily used wall and floor tiles as well as tiles with permanent water contact.
4.8