Epoxy Resins for River Tables & Castings up to 5cm (ECO+/ PRO+)

Epoxy Resins for River Tables & Castings up to 5cm (ECO+/ PRO+)

River tables, lamps, projects with high moulded and cast parts, etc.

from £ 15.99 inc. VAT

4.780487804878 out of 5 based on 41 customer ratings

(41 customer reviews)

Delivery time: 1-3 working days

Can be use on all surfaces such as wood, concrete, glass and more
Max. thickness per layer: 5cm (heights up to 30cm possible for small castings)
Working time: approx. 6h, Curing time: 48-72h
Scope of delivery: Resin A and hardener B (Mixing ratio 2:1)
Conveniently select a colour to colour the clear epoxy resin

*1. Select colour (optional) – 146 Colours

*2. Select Epoxy System

Legend:

✓ Ideally suited.

X Not suited.

Processing Characteristics
Max. Pouring Height at 20°C¹	5cm
Waiting Time until Further Casting²	48-72h
Gelling Time and Pot Life	6h
Min. Processing Temperature	15°C
Recommended Processing Temperature	20°C
Max. Relative Humidity during Processing	70%
Max. Material Shrinkage	1%
Processing Time (at 20°C)
At Layer Height 0-3mm	360min
At Layer Height 1cm	360min
At Layer Height 2cm	360min
At Layer Height 5cm	240min
Technical Properties
Touchable / Accessible after	48-72h
Completely Chemically Cured after	14 days
Transparent Resin	✓
Crystal Clear Curing	X (ECO+) ✓ (PRO+)
Max. Possible UV Stabilisation³	X (ECO+) ✓ (PRO+)
Self-Venting	✓
Bubble Free	✓
Self-Leveling	✓
Solvent-Free	✓
VOC Free⁴	X (ECO+) ✓ (PRO+)
BPA Free⁵	✓
Plasticiser Free (Phthalate)	✓
Resistant to Chemicals	✓
Scratch Resistant⁶	✓
Doming Effect (Depth Effect)	✓
Miscible with all EPODEX Colours (Except WB PIGMENT)	✓
High Adhesion	✓
Density (g/cm)³	1.1
Viscosity (mPa·s)	350
Max. Heat Deflection Temperature⁷	60°C
Min. Heat Deflection Temperature	-30°C
SHORE Hardness after Curing (D1)	80
Storage Temperature	15-30°C
Shelf Life	12 Months
Shelf Life after Opening⁸	6 Months

Casting above the maximum pouring height per process is not recommended. The resin may boil as a result of the reaction and yellowing, cracking and deformation can occur. By reducing the temperature (room, substrate, material temperature to e.g. 15 °C and reducing the area to e.g. 15x15cm, casting heights of up to 50cm can be achieved in one casting process
There is no maximum time limit to pour the next layer.
No epoxy resin is completely UV stabilised. However, high-quality raw materials and additives such as UV absorbers can increase UV protection. By using a top coat, you can increase UV stabilisation even further. Possible top coats are e.g. transparent polyurethane (PU) resins or lacquers which are painted or sprayed onto the epoxy coating as a finish.
When properly used and completely cured, it is VOC free..
According to formula without free BPA.
Our epoxy resin systems have a high scratch resistance, but are not completely scratch-resistant. Scratch resistance can be increased by using a top coat. Possible top coats are e.g. transparent polyurethane (PU) resins or lacquers which are painted or sprayed onto the epoxy coating as a finish.
The heat deflection temperature indicates up to which temperature the cured epoxy resin system remains mechanically stable. At higher temperatures, the cured epoxy can soften. By annealing (curing at higher temperatures >60°C), the heat resistance can be increased.
If the lid of the container is closed directly after opening, the shelf life after opening is at least 6 months.

from £15.99ECO+ (transparent & low priced)
ECO+ System
from £17.99PRO+ (crystal clear & UV-stabilised)
PRO+ System

*3. Quantity of epoxy resin (resin A + hardener B)

*4. Order Matt PU Topcoat as well?

PU Topcoat

For a more scratch-resistant surface with increased UV protection, we recommend ordering our satin-matt 2-component polyurethane resin (2K PU resin) as a topcoat. The PU resin is highly durable and can be easily rolled onto the epoxy resin, wood, cement, concrete and much more with a foam roller in two thin layers (with max.150µm layer thickness).

Properties

Can be used as epoxy, wood, concrete, microcement, acrylic, parquet, laminate and more
Properties: odourless, highly durable, waterproof, UV-stable, for indoor and outdoor use.
For rolling on in thin layers (roll coats): Max.150µm/coat
Consumption: approx.100g/m²
Pot life/processing time: approx. 60min at 1kg material and 20°C
Curing time: 20-24hrs.
Scope of delivery: Resin A and hardener B
Mixing ratio resin and hardener: 10:1 (e.g. 1.000g resin to 100g hardener)

Calculate quantity

SKU: sys-ecoplusproplus Categories: All, Epoxy resin after application