Polyurethane Hardener (without resin)

The hardener B-component must be mixed with the resin A-component before use.

Coating and Sealing with PU Resin

1. Coat the surface with the PU resin.
2. To do this, mix the PU resin (A) with the appropriate PU hardener (B) in the specified mixing ratio. PU glossy: 10:2 by weight (e.g.: 1kg A + 0.2kg B); PU matt: 10:1 by weight (e.g.: 1kg A + 0.1kg B). Optionally, you can add up to 20% water.
3. Transfer the mixture to a paint tray and mix again. This way you make sure that resin (A) and hardener (B) mix completely.
4. If a transparent coating is not desired, mix the supplied WB colour paste with the resin-hardener mixture to colour the transparent mixture. We recommend a colour proportion of approx. 10%, e.g., 100g WB colour paste to 1.1kg or 1.2kg resin+hardener. We recommend mixing smaller quantities of approx.1kg per coat, as the material, is very productive and sets quickly (pot life: 60 min. with 1kg).
5. Apply the material thinly with a foam roller in a criss-cross pattern. To achieve an even finish, use our scraper grid to scrape off excess material before application. We recommend a layer thickness of max.150µm.
6. The material can be walked on after approx. 20-24 hours and is completely chemically cured after approx.7 days.

Pro Tip: We recommend adding water to the PU resin when working at high ambient temperatures or when mixing a large quantity in order to avoid an orange peel texture.Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.

Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.