from 19.99  inc. VAT

4.875 out of 5 based on 8 customer ratings
(8 customer reviews)
Delivery time: 1-3 working days
  • Can be used on all surfaces such as concrete, screed, wood and more
  • Note: For heavily stressed wall and floor , as well as surfaces with permanent water contact, we recommend our waterproof Concrete Paint 2K.
  • Properties: low odour, abrasion-resistant, UV-resistant, high coverage
  • Consumption: 100-130g/m²
  • Application instructions can be found on this product page
    • 1x Flat Brush 5cm
    • 1x Stir Stick
    • 1x Foam Roller 25cm + handle
    • 1x Paint Tray 32cmx35cm
    • 2x Exchangeable insert for paint tray 32x35cm
    • 1x Plastic Drop Cloth 50m²
    • 1x Nitrile Gloves
    • 1x Masking Tape 3cmx50m

SKU: sys-beton1k Category:
Product Properties
Product Description Concrete paint, stone paint, wall paint, floor paint
Scope of Application Normally stressed walls and floors made of concrete, cement, plaster, wood and masonry
Field of Application Indoor and covered outdoor
Method of Application Paint, roll, spray
Consumption* approx. 140g/m²
Range/Yield* approx. 7m²/kg
Odour Unfolding during processing Low (odourless)
Spray and Drip Behaviour Very low (no splashes)
Processing Temperature min. 8°C object and ambient temperature
Optimal Processing Temperature 20°C
Mixing Ratio by Weight Resin (A): Hardener (B) No mixing ratio, as one-component product
Pot Life at 20°C No pot life available
Technical Properties
Basic Compound Pure acrylate
Gloss Level satin gloss
Consistency Viscous (drip resistance, ensures easy and clean application)
Opacity according to DIN EN 13300* High (class 1-2, 6-8m² per litre)
Coating's Advantages *abrasion-resistant, hard-wearing, scrub-resistant
Water vapour diffusivity/Water vapour permeability DIN EN 1062-1 Medium (Class 2; diffusion-open; sd-value: <0.5m)
Diffusion-open, Breathable Yes
Colour Resistency High
Colour Intensity High
Paint's Structural Finish Fine structure, even coating pattern
UV-resistant Yes
Solvent-free No
Plasticiser-free Yes
VOC-free No
Susceptible to abrasion marks and shiny spots (so-called writing effect) Low (Touch-Protect-System)
Environmentally Friendly Yes
Proportion of Binder High (min. 20%)
Proportion of Pigment High (colour paste content: min. 10%)
Density (g/cm³) 1,3
pH-value 25°C
Maximum Grain Size approx. 8.2-9.2
Dilutable as primer max. 20% water
Tool Cleaning Immediately after use with water
Storage cool, dry and frost-free
Max. Storage Temperature 25°C
*Consumption, coverage and opacity may vary depending on the substrate (wallpaper, woodchip, concrete, wood etc.), the tool used (foam roller, paint brush, etc.) and the choice of colour. Brilliant yellow, red and orange tones generally have a lower opacity. Several coats may be necessary here.


CONCRETE PAINT 1K is abrasion and weather resistant. It is odourless and water based. It is suitable for use on any surfaces without standing water, indoors and outdoors. We recommend our ultra-resistant epoxy resin-based CONCRETE PAINT 2K for floors subject to heavy wear and tear such as garages, parking lots, industrial floors and/or floors with standing water.

CONCRETE PAINT 1K can be used as:

  • Flooring Paint
  • Flooring Sealant
  • Wall Paint
  • Concrete Paint
  • Cement Paint
  • Screed Paint
  • Plaster Paint
  • Stone Paint

Consumption volumes: 100-130g/m² per coat on smooth, non-porous substrates. Depending on the substrate, 1 kg of paint should be sufficient to paint one coat on approx. 10m². We recommend applying ca. 2 coats. We recommend applying a suitable primer (e.g., undercoat) on very porous substrates to minimize the absorption of CONCRETE PAINT.

Instructions for Use

  1. The temperature of the room, the substrate and the paint must be at least +15°C.
  2. Make sure that the substrate is clean and free of grease. To do so, we recommend using EPODEX PRE-CLEANER.
  3. The substrate should be clean, dry, and free of any substance that may prevent the paint’s adhesion.
  4. We recommend applying a suitable primer on very porous substrates (e.g., paint undercoat).
  5. Mix well before use.
  6. Apply a coat of paint with a foam roller and let it dry (approx. 8 hours at 20°C).
  7. Apply several coats until you achieve the desired result. We recommend applying at least 2 coats of paint.

Recommendations: Processing temperature: The room and substrate temperature must be at least 8°C. Do not apply on heated surfaces and in direct sunlight. Drying problems may occur at low temperatures. To achieve a lower viscosity, dilute the paint with up to 5% water. Clean all accessories with water immediately after use.

EU limit value: (Cat. A/d): 140g/L (2010), max. 30g/L VOC

Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.

Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.

Danger and Security Statements:

Attention: The product contains preservatives: 1,2-Benzisothiazol-3(2H)-on; 2-Methyl-2H-isothiazol-3-on. Causes serious eye irritation. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not get in eyes, on skin, or on clothing. Dispose of contents and container in accordance with all local, regional, national or international regulations. Safety data sheet available on request.

Customer reviews

Rated 4.875 out of 5 stars
8 reviews
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

Pictures from client projects

8 reviews for CONCRETE PAINT 1K | All Colours

Add a review

Use one of the allowed file type: jpg,png,mp4.