TILE PAINT 2K Resin (without hardener)

1. Sand the substrate to improve the paint adhesion. To do so, use EPODEX sandpaper.
2. Make sure the substrate is clean and free of grease. To do so, use EPODEX PRE-CLEANER.
3. Mix the resin A-component with the hardener B-component in a ratio of 5:1 (e.g., 5kg resin: 1kg hardener).
4. Stir through the edge and bottom of the mixing cup as the material will settle there. Ideally, pour into a clean mixing cup and mix again until the mixture is streak-free. This ensures that the resin A-component and hardener B-component are completely mixed together.
5. Mix the clear paint with our water-based colour paste WB PIGMENT to tint it. Recommended amount of paste to be added: Add 5% in weight to the paint. (e.g. 300g colour for 6kg TILE PAINT 2K)
6. Apply a coat of paint with a brush or foam roller and let the it dry (approx. 12h at 20°C). (Pot Life/Processing Time: at 20°C: approx. 50 minutes, at 25°C: approx. 35 minutes)
7. Reapply as many coats as required to achieve the desired opacity. We recommend applying ca. 2 coats.
8. As an option, tile joints can be re-done with our practical EPODEX grouting pen.

Recommendations: Processing temperature: The room and substrate temperatures must be between 8°C and 25°C. Do not apply on heated surfaces or in direct sunlight. Drying problems may occur at low temperatures. Clean tools with water immediately after use.

EU limit value: (Cat. A/d): 140g/L (2010), max. 140g/L VOC

Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.

Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.