Epoxy Resin Table

Make Your Own Epoxy Resin Table

Coating an epoxy resin table is not difficult! Order high-quality epoxy resin now and do it yourself. Extravagant design tables, exciting river tables or insulating tabletops for gastronomy and industry: EPODEX has the ideal resin for your project. Whether you want to make a new epoxy resin table or refurbish and customise an older table, we have the products you need.

Our step-by-step instructions will guide you quickly through the process. Use our synthetic resin on wood, plastic, rigid foam, natural stone, GRP or concrete. In addition to crystal clear resin and hardener, you will find a wide range of epoxy paint in our shop. Choose your epoxy resin kit now:

Epoxy Resin Table Coating

Would you like to design your table individually and make it durable and easy-to-maintain? A coating with epoxy resin is the right choice for you! The synthetic resin is easy-to-process, cures firmly and is highly durable. It makes your table largely resistant to liquids, scratches or stains.

An epoxy resin table does not require any special care. It can be cleaned with common all-purpose cleaners and remains as good as new for a long time. In contrast to untreated wooden tables, epoxy tables do not require regular maintenance. This is the reason why an epoxy resin table coating is often used in restaurants, where tables and countertops are subject to heavy tear an wear.

DIY Epoxy Resin Table Starting at £12.74

To make your own epoxy resin table, you first have to measure the size of your table and decide which layer thickness you would like to apply. You can calculate the exact quantity of epoxy resin with our calculator. Depending on the required quantity, you can choose the ideal resin kit for your table. A kit always consists of resin and hardener. The amount needed to coat the surface of a 3m² table is available for £12.74.

With epoxy resin you can easily customise your table, counter or worktop and make them more durable. It can be cast into nearly any shape and dyed in any colour. In addition to clear epoxy, we also offer a wide range of colour pigments that you mix these into the clear epoxy resin. Thus, there are no limits to your creativity!

You can apply our coating resin to wood and many other materials. No matter, if you want to coat a natural wooden table or make a epoxy resin table with bright colours and various highlights. It can be easily done with epoxy resin by EPODEX!

Steve Smith
Steve Smith
Any questions? I am glad to help!
ProvenExpert

TOP ratings
9,78 of 10

VERY WELL
˂
epoxy resin table clear transparent

DIY Epoxy Resin Table

You can make your own epoxy resin table in a few simple steps. First, clean the table to be coated thoroughly and let it dry. Then, mix the resin in a 2:1 ratio with the hardener for about three minutes. Make sure that you mix slowly to avoid the formation of bubbles. Epoxy resin is best applied with a squeegee or paint roller.

We recommend that you first apply a 0.2 to 0.5mm thin layer of epoxy primer and let it cure. This layer seals your table and prevents too much material-loss. In addition, the primer prevents air from penetrating into the resin, resulting in bubbles. The process is especially recommended for absorbent surfaces such as wood. After the primer has cured, you can apply the a layer of epoxy resin.

For layers of 1cm or less, we recommend EPODEX ECO. For transparent, up to 2cm thick layers, EPODEX PRO is the best choice. For layer thicknesses over 2cm EPODEX PRO+ is applicable. Detailed instructions and examples can be found on the product pages.

Can We Help with Your Epoxy Resin Table?

Do you have any questions reagrding our products or are you not sure how much material you need for your epoxy resin table? Would you like a specific colour that you cannot find in our shop? Do not hesitate to ask us! You can reach us by phone, e-mail and WhatsApp.

epoxy resin table coloured
epoxy resin table metallic pigments
epoxy resin table cover coating